* Speed Test calculator: ping, download, and upload against the API
Users asking whether the hotspot is fast enough, or how many people can
stream video at once, had no objective tool that works offline. This
adds one under Calculators > Tools & Reference.
Backend (wrolpi/speedtest.py, /api/speedtest):
* ping: tiny no-store JSON the browser times for round trip latency.
* download: streams slices of a pre-built random buffer for a clamped
number of seconds (0.1-15). Random so no proxy or compression can
flatter the result; slices so no bytes are generated per request.
* upload: streaming-body handler that reads and discards the body and
reports bytes and elapsed time. Requests over 8 MiB are refused.
* info: the client address Caddy forwarded plus how many tests are in
flight. Sanic now trusts one proxy hop (PROXIES_COUNT = 1) so
request.remote_addr is the browser, not Caddy. Nothing else read
that field before.
There is deliberately no one-test-at-a-time lock. Several people
testing at once is how a user learns how the link shares between
streamers, so the server only counts in-flight tests (a shared_ctx
Value created pre-fork so every worker sees the same number) and the
UI reports how many others ran alongside.
Both Caddyfiles route /api/speedtest/* unbuffered, as the SSE chat
route already is, so throughput is measured live rather than in bursts.
Frontend:
* speedtest.js holds the logic with no React in it (bucketed
throughput, steady-state average that drops the first second, ping
stats, stream-capacity tiers, hotspot address check) so Jest drives
it with fake fetch and streams.
* SpeedTestCalculator runs 20 pings, a 10 s download, and a 10 s upload
with a live figure and rolling trace, then shows Mbps and MB/s, ping
verdict, the client address with a hotspot badge, and a table of how
many 480p..4K streams the download speed supports. Upload is
sequential POSTs of one 4 MiB Blob because Safari cannot stream a
request body. Nothing is saved.
* Sparkline is a new inline-SVG ui component (no chart dependency),
added to /theme-sample and checked in all four themes. A missing
sample is a gap, not a plunge to zero.
The page states that it measures the network path, not the drive that
actually serves video files.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* speedtest: bound uploads in time, close the Start race, address review
Review on #708 found three bugs and some polish:
* Start could be clicked again while the first fetchInfo() was still
pending, because the phase only left `idle` after that await. A
second click made a second AbortController and a second concurrent
run, and Cancel only reached the later one. start() now refuses when
a controller already exists and enters a `starting` phase
synchronously, so the button is Cancel before the first await.
* The upload phase could overrun the advertised 10 s by however long
the in-flight 4 MiB POST took: on a slow hotspot, the very link this
tool exists for, that is tens of seconds. runUpload() now aborts the
in-flight request at the phase deadline (counting only completed
requests) and uses 1 MiB bodies so a few-Mbps link still completes
several inside the phase.
* The server upload sink was capped by size only, so a slow or paused
body could hold a worker until 8 MiB eventually arrived. It now also
enforces MAX_UPLOAD_SECONDS (15 s, matching download) and answers
408 when exceeded. Both caps together are what "cannot hold a
worker" actually requires.
Also: a NaN `seconds` now gets a NaN message instead of "must not be
negative"; the module, Sparkline, and gallery docstrings are trimmed
to purpose; and the upload counter is covered for the mid-stream 413,
the 408, and a broken body.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* ui: a preview map that waited for a container it could never see
Both map preview modals -- the per-region eye button and "View All Regions"
-- opened to an empty box. Each renders a div into a Modal and hands it to
MapLibre from an effect gated on `open`, reading the node out of a `useRef`:
if (!open || !mapContainer.current) return;
Mantine's Modal mounts its body one commit after `opened` flips true, so on
the render that opens the modal the ref is still null. The effect returns,
nothing it depends on changes again, and it never runs a second time. No
console error, no rejected promise, no canvas -- just an empty div.
Semantic UI's Portal mounted the body in the same commit that opened it, so
the ref was attached by the time effects ran. The effect bodies are
byte-identical across that migration; the modal library is the only variable,
confirmed against a device still running the older build where both previews
render.
A callback ref instead, so the effect re-runs when the node arrives and this
stops depending on any modal's mounting schedule. The async source lookup
also gets a cancelled flag: it could resolve after the cleanup ran, building
a map nothing would ever remove and leaking a WebGL context per open.
The tests drive the real page and assert a map was built against a node that
is in the document -- the outcome, rather than the mechanism that quietly
changed underneath it. Seven of the eight fail on the code before this.
* build: docker had no world underneath its map regions
Caddy serves /blobs/map-overview.pmtiles out of /opt/wrolpi-blobs, and that
blob is the world at zoom 0-6 -- what a regional extract sits on top of.
Without it a user who subscribes to a few regions gets those regions floating
on an empty background everywhere their data does not reach. Only a full
planet file, at 134GB, makes it unnecessary.
Raspberry Pi and Debian installs get the blob from pi-gen, the live-build
config, and upgrade.sh. Docker got nothing: the compose file bind-mounted a
git-ignored host directory over /opt/wrolpi-blobs, and a bind mount replaces
the image's directory rather than merging with it, so the path existed and was
empty on every Docker WROLPi. Verified against a running deployment, where
that URL returned 404 while the same URL on hardware returned 206.
So the web image fetches the blob at build time, as the other three builders
do, and the mount that would hide it is gone. `curl -f` so an HTTP error
fails the layer -- an image that builds without the blob is this same bug,
except silent at build time too.
The tests read the deployment files rather than a built container: building
to check costs a CDN download and several minutes, and both things that broke
-- nothing fetches it, a mount hides it -- are visible in the source.
* ui: cancel the load handler too, and make the cancel test falsifiable
Review follow-ups on the preview modals.
The `cancelled` flag was checked before constructing the map but not inside
the `load` handler it installs, so cleanup landing between the two left that
body drawing into a map `remove()` had already torn down. Guarded, mirroring
the `destroyed` pattern in MapViewer.js. The source promise also gets a
`.catch`: the helper cannot reject today, but nothing says it never will, and
an unhandled rejection here would be as quiet as the bug this all started as.
Two test corrections, both cases of an assertion claiming more than it read:
The region-drawing test spied on `addSource` AFTER construction and then
re-fired `load` by hand, so its count came entirely from that manual call and
said nothing about the production path. FakeMap now records the sources it is
given, and the assertion reads what the component's own `load` drew -- each
region once, in order, and none for the entry with no bbox.
The new cancel test passed with the guard deleted, which is worse than not
having it: Mantine had not mounted the modal body when it closed, so the
effect had never run and there was nothing to cancel. It now waits for the
effect to reach the source lookup before closing, and ships beside a control
that releases the same held promise WITHOUT closing and requires a map. The
control is what makes the zero meaningful; verified that removing the guard
fails the cancel test while the control still passes.
* fix(app): depend on @testing-library/dom directly
jest-dom 7 moved @testing-library/dom from a bundled dependency to a peer
dependency. Nothing else pulls the top-level copy in — @testing-library/react
13 carries its own nested v8 — so it was present only as a peer, and CI
installs with --legacy-peer-deps, which skips peers. Every suite then failed
to load setupTests.js with "Cannot find module '@testing-library/dom'".
Declare it as a devDependency so it installs under either resolution mode.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(app): import mount from cypress/react
Cypress 14 removed the cypress/react18 subpath; cypress/react mounts React
18 itself. The e2e support file loads commands.js, so the stale import broke
bundling for every spec, not just component tests:
Module not found: Package path ./react18 is not exported from package cypress
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* ci: install and cache Cypress the way the bump requires
The Cypress binary lives in ~/.cache/Cypress, outside node_modules, but only
node_modules was cached. A restored cache satisfied npm, so npm skipped the
postinstall download and the 15.x binary was never fetched:
The cypress npm package is installed, but the Cypress binary is missing.
Cache both paths and install the binary explicitly.
Also align the JS toolchain with what actually ships. Debian 13 devices run
nodejs 20.19.2 and install with a plain `npm install`; the Docker app image
does the same. CI pinned older Node and passed --legacy-peer-deps, which
skips peer dependencies -- that is why jest-dom 7's peer requirement passed
review and broke CI. Match the devices instead.
Pin caddy to 2.11.4, the version Debian 13 devices run, rather than latest.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* ci: test on Python 3.13, the version that ships
Debian 13 devices run Python 3.13.5 and the api/controller/help images are
python:3.13-trixie, but CI ran 3.11 (and one job on 3.12), so the runtime
under test was two minors behind the runtime in production.
Verified on 3.13 before switching: backend 1712 passed, 5 skipped; controller
883 passed. The only new warning is SQLAlchemy 1.3.22 reaching Python's
deprecated datetime.utcfromtimestamp(), which is noise rather than a break.
Drop api-tests-3-12: no workflow referenced it, it duplicated api-tests, and
its "Sanic does not yet support 3.12" note is stale now that devices run 3.13.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Create a new Docs module that consolidates PDF and eBook handling into a
unified system with subjects and authors support. This replaces the
separate PDF/eBook modelers with a single Doc model backed by an
alembic migration (rename ebook to doc).
Key changes:
- New modules/docs package with models, API, extractors, and lib
- Subject and author metadata extraction with case-insensitive
normalization for cleaner PDF metadata
- Frontend Docs pages with AuthorsPage, SubjectsPage using
CollectionTable, and doc card deletion
- Global search integration for subjects and authors
- Generic collection item count support
- Frontend file card metadata adjusted to match collection sort
- Bump yt-dlp version
- Replace nginx with Caddy as the web server for both Docker and native
(RPi/Debian) deployments. Caddy handles HTTPS termination, reverse
proxying to all services (API, React app, Controller, Kiwix, Help, Map),
and serves the media/download file browsers.
- Generate a Root CA and signed leaf certificates for HTTPS. The Root CA
uses Name Constraints to restrict signing to local addresses only
(.local, localhost, and RFC 1918 private IP ranges), mitigating MITM
risk if the CA key is compromised.
- Add an HTTP landing page that guides users through one-time CA
certificate installation on iOS, Android, macOS, Windows, Linux, and
Firefox, with auto-redirect when the cert is already trusted.
- Add trailing-slash redirects for /controller, /docs, /media, and
/download so bare paths don't fall through to the React catch-all.
- Add a Root CA download link on the Settings page under Configs.
- Update help.sh diagnostics for IPv6 listener detection and HTTP/2
status codes.
- Remove all nginx config files and the https_proxy Docker container.
- Bump wrolpi-help submodule with certificate documentation.
