* Add a Solar calculator with offline NASA POWER data
Estimates a solar array's typical-year production from a location and the
panels; everything else has defaults under an optional "Fine-tune" section.
The model works from 12 monthly averages: Klein's average day per month, the
Erbs monthly diffuse fraction, Collares-Pereira & Rabl / Liu & Jordan hourly
split, HDKR transposition for fixed, single-axis and dual-axis arrays, then
PVWatts' ASHRAE incidence loss, SAPM cell temperature, DC power, system
losses and optional inverter. "Best for the year" and "Best for winter" sweep
the tilt.
Sunlight, diffuse, albedo and temperature come from NASA POWER's 2001-2020
climatology on a 1 degree grid, packed into app/public/data (3.1 MB, ~1 MB
gzipped) by scripts/build_solar_climatology.py and fetched only when the
calculator opens. Users can replace it with their own monthly values.
Every setting lives in the URL, with defaults left out, so the Share button
shares the whole configuration.
Against PVWatts v8 for a 1 kW fixed array: Phoenix +0.6%, Seattle +8.8%,
Anchorage +8.0% annually; these are recorded as tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open the Solar calculator from the map, pins and current location
The map's right-click (or long-press) menu gains "Calculate Solar
Performance", and each saved pin a sun button; both open the calculator at
that location. A button beside Latitude fills in the browser's current
location. Locations are rounded to 4 decimals, and longitudes from a map
panned around the world are wrapped back to -180..180.
The map removed lat/lon/z from the URL when it closed, even after navigating
to another page, which stripped the calculator's location from its URL (and
from links shared with the Share button). It now only cleans up while the
URL is still a map page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add off-grid sizing to the Solar calculator
A new "Off-grid sizing" tab sizes a battery system for the darkest month
from a list of devices (watts x hours per day):
- Battery bank for a number of days without sun, for LiFePO4 or lead-acid,
at 12, 24 or 48 V. Outdoor lead-acid is enlarged for the cold; outdoor
lithium warns against charging below 0 C.
- Panels needed, from the worst month's DC production per kW at the chosen
angle, with a button to apply the count. A PWM controller's loss (battery
voltage over the panel's Vmp) raises the count.
- Charge controller current, and the string voltage on the coldest morning
against the controller's limit, since cold panels exceed their rated Voc.
The coldest morning defaults to 25 C below the coldest monthly average.
All inputs live in the URL like the rest of the calculator.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bump wrolpi-help for the Solar calculator help page
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Credit NASA POWER as it asks, and say how the data was changed
- The calculator gains a "Data attribution" link under the location with
NASA POWER's requested acknowledgment, the data reference (Climatology API
v2.10.0, downloaded 2026/10/04), the CC BY 4.0 license, and how WROLPi
modified the data (rounded to one byte per value, temperature averaged
into 1 degree cells, interpolated between cells), which CC BY 4.0 requires.
- The build script writes the same text to solar-climatology.LICENSE.txt
beside the data, with the API version taken from NASA's responses and the
date the tiles were downloaded. A test keeps the page and file in step.
- Bumps wrolpi-help for the updated attribution in the help page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Solar: fix PWM sizing, Voc sign, unit switching and loading on review
- PWM usable power now uses the string's voltage (Vmp x panels in series),
delivers nothing when the charging voltage is at or above the string's Voc,
and falls off between Vmp and Voc. The "too little voltage" warning covers
PWM as well as MPPT. Previously two panels in series counted double, and a
panel that could not charge a 48 V bank counted as fully usable.
- A Voc temperature coefficient entered without its minus sign is treated as
negative, in the math, the URL and the input, so the cold-morning check
cannot be made too generous.
- Switching Fahrenheit on or off converts the entered temperatures instead
of reinterpreting them.
- While the sunlight data downloads, the off-grid tab shows a loader rather
than asking for a location, and holds the cold-morning verdict until the
site's temperatures are known or one has been entered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Solar: move the data attribution to the bottom of the page
The full NASA POWER acknowledgment, license and changes now sit in a small
"Data attribution" section at the end of the calculator, always visible,
instead of behind a link under the location. The source line under the
location points to it. Bumps wrolpi-help to match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Solar: drop the data source line under the location
The attribution at the bottom of the page is enough. The line under the
location now only appears to report the data's state: loading, failed to
load, or replaced by the user's own values. Bumps wrolpi-help for the
refreshed screenshot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Filtering media was keyed on `data-theme="night"`, which made it a property of
the theme that no user could turn off. Some people want their media tinted to
match the interface; some want to see the actual image.
A theme now declares a filter and whether it starts on, and the user decides:
night night-red on by default. An unfiltered thumbnail undoes dark
adaptation, which is the whole point of the mode.
amber amber-mono off by default. Amber is a look, not a night-vision
aid, so media keeps its real colors until asked for.
light - no filter offered, so no toggle is shown.
dark -
The choice is stored per theme, so wanting amber's tint says nothing about
wanting night's. The toggle lives in the theme picker, which puts it on the
Settings page and in the gallery at once.
Mechanically the rules now key on a `data-media-filter` attribute rather than
`data-theme`: a rule keyed on the theme could not be turned off. index.html
stamps that attribute before first paint alongside data-theme -- without it,
night mode paints a screen of unfiltered thumbnails while the bundle arrives
over a hotspot, costing the user the adaptation the theme exists to protect.
Tests cover both the attribute rule and the fact that the inline script's
duplicated ids and defaults still agree with names.ts.
The amber matrix is the same luminance collapse tinted to #ff9500 (red full,
green 0.584, blue zero) with a gentler gamma than night's: amber carries far
more luminance and clips to a flat wash otherwise.
The gallery gains a Media filtering section showing the WROLPi logo filtered,
beside an unfiltered copy that opts out with `night-unfiltered`. That copy is
behind a click on purpose -- an unfiltered image is a bright patch, and night
mode should not spring one on someone reading in the dark.
ui-design.md gains the media filtering contract it never got in Phase 0,
including the note that a Phase 3 custom theme names an existing filter id and
cannot ship its own matrix, since that would be code rather than data.
Addresses the automated review on #583; all three were real.
The night filter only applied to elements tagged `.media`, and nothing in the
app carried that class - so selecting Night filtered the interface but left
every video, thumbnail, PDF and map full-colour, which is precisely the thing
the mode exists to prevent. The Settings copy promised otherwise, so it was
also wrong.
It now targets the element types instead of an opt-in class, because night mode
has to fail safe: a library of thousands of files reaches the screen through
many components, and one that forgot to opt in would undo half an hour of dark
adaptation. `.media` still works for wrappers that must be filtered as a unit,
and `.night-unfiltered` opts out. The filter is restated on `:fullscreen`, which
a filter on an ancestor stops reaching. Verified on the videos page: all 25
media elements filtered.
Three of the five theme choices rendered a fallback glyph and logged errors,
because the icon map was built by grepping literal name='...' strings and the
navigation picker passes its icon through a variable. Adds sun, moon and
lightbulb, plus a test asserting every theme choice resolves to a real icon.
The pre-paint script wrapped the `matchMedia` fallback in the same try as the
storage read, so a device with storage blocked painted light even when it
prefers dark - recreating the flash the script exists to prevent.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every color now resolves through CSS custom properties on
html[data-theme=...], so a theme is a table of values rather than code.
Four themes ship: light, dark, night (red hues only, to preserve dark
adaptation off-grid) and amber (monochrome amber terminal).
Fonts are exposed as two roles, --font-body and --font-mono, which a theme
assigns a bundled face to; amber uses the mono face. Faces must be
self-hosted, never fetched from a CDN, so the app keeps working offline.
Night mode also filters media that cannot consume tokens - video, images,
PDFs, embedded pages, canvases - through an SVG color matrix that maps
luminance onto the red channel. Tag such an element with `.media`; a filter
on an app-level ancestor would create a containing block and break fixed
positioning.
ThemeProvider persists the choice and index.html stamps data-theme from
localStorage before the bundle loads, so the first paint already matches the
saved theme on a slow connection. The OS preference is followed only while
"system" is selected; night and amber are explicit choices. The nav toggle
becomes a five-item picker.
Semantic components still render themselves, so only the shell is
token-driven for now; the inverted props stay in place until each component
is migrated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The rebrand hook from the previous commit failed during lb build because
it referenced files as `binary/boot/grub/grub.cfg` etc., but
live-build's binary_hooks runs each hook with cwd already set to
binary/ (it does `cd binary && ../$HOOK`). The paths now drop the
`binary/` prefix.
Splash regenerated from the new transparent logo
(app/public/icon-transparent.png) so the wifi-pie has a clean white
outline on the dark splash background — better visual separation than
the white-stripped icon.png the previous splash used.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* A new zim module has been added, this module allows several things to interact with Zim files.
* Allow searching of Zim files using libzim.
* Allow downloading of Kiwix projects (wikipedia, wikibooks, etc) on a schedule which replaces the outdated files.
* Creation of a new zim docker container which allows viewing of the Zim file contents.
* This commit also adds move/rename/mkdir features in the File Browser.
* File tags are preserved when moving/renaming.
Moving FilesRefreshButton and DirectoryRefreshButton out of browser file.
Moving file fetching tino FileBrowser.
Removing sub-folders from Files display when any parent folder is clicked.
Using closed captioning for vtt/srt file icon.
Using my own react-semantic-toasts-2 to use toasts in Node 18.
Fixing bug where more than the last page was displayed.
Upgrading yt-dlp.
Fixing sub-folder file selection.
Adding rowKey to SortableTable to give React a key for each row.
Renaming key to path.
Removing duplicate urls.
Unifying file modals.
Displaying modals for image and text files.
Handling refresh loading in FileBrowser. Creating refreshing_directory flag.
Removing accidental commit.
Sorting by url_count.
Using SortableTable on Domains page.
Using SortableTable for Channels page.
Created new FileBrowser which allows browsing of files in the media directory.
Using Node 18 in pi-gen.
Creating new FileBrowser to replace outdated react-keyed-file-browser.
Returning mimetype with file list.
Do not display 'Do not download' on Channel download in Dashboard.
Allowing null channel download frequency so user can stop downloading a channel.
Bumping version for Node 18.
Using my own semantic-ui-offline to avoid pulling Google fonts.
Upgrading app docker container to use Node 18. This requires the removal of several npm packages. File browser will require re-write. It now pulls fonts from Google, this will need to be fixed.
Testing DownloadsToggle click.
Testing trinary states of DownloadsToggle.
Installing @testing-library/user-event for testing App.
Handling all combinations of toggle in light and dark.
Changing CPUUsageProgress colors to be more readable in dark mode.
Moving theme handling into Theme.js. Importing element wrappers from Theme.js to handle element theming.
Changing video menu to dark mode.
Creating ThemeContext to share Dark Mode setting.
Removing duplicate code for search functions.
Displaying X when downloads are disabled.
Using react context to share settings across components.
Refusing to start workers when WROL Mode is enabled.
Changing warning to debug.
Queuing recurring downloads first.
Adding Video.url index.
Adding special handling for youtube shorts to videos.
Reworking Downloads to have one worker per process.
Testing creating downloads and getting downloaders.
Testing video validation and poster generation. Testing video statistics.
Increasing inventory test coverage.
Adding pytest.ini to automatically detect async test.
Adding more archive test coverage.
Testing Archive CRUD.
Catching and logging when encountering error during indexing.
Using FileIcon when Archive has no screenshot.
A Video will be assigned to a Channel by its info json first, then to its directory.
Including suffix in File json.
Adding index for File.suffix.
Gathering suffix during indexing.
Passing entire file down to FileIcon.
Moving logging up.
Returning File.associated in file json.
Associated files are last in file search.
Removing duplicate refreshing code by creating new _refresh_directory function.
Changing File.idempotency to a datetime to avoid having to clear idempotency.
Truncating indexes to avoid error with large files.
Don't overwrite video data when info json is empty.
Using already_downloaded for channel videos.
Awaiting refresh in Channel.refresh.
Testing that videos already downloaded aren't downloaded again.
Adding indexes for video/archive referenced paths.
Changing grid width for mobile or computer.
Adding button to refresh specific directories.
Restoring Channel edit link.
Fixing caption path in video_modeler.
Adding ZIP files to mimetype colors.
Using model instead of first file's model.
Fetching File models in batches to avoid issuing a SELECT for every File with a model.
Flushing generated poster file.
Getting Channel in VideoPage, relying on Video.channl_id, falling back to URL's channel_id.
Attaching Video to it's Channel during download.
Using ExternalCardLink for ArchivePage singlefile link.
Validating and indexing videos after download.
Handling glob when file name contains matching characters.
Reworking and testing split_path_stem_and_suffix and glob_shared_stem.
Adding associated video files to DB during upsert.
Adding pending downloads to dashboard.
Hiding status when download is open.
Handling when load is empty.
Adding load statistics to Dashboard.
Limiting concurrent after_refresh functions.
Handling when no onSelect is declared.
Adding ImageRow for FileTable.
Moving image date into Card.Meta.
Using ExternalLink for FileCard.
Using ExternalLink for ImageCard.
Handling when error occurs during refresh of a directory. Committing during refresh to avoid losing all files if an error occurs.
Removing api health check to avoid spamming logs.
Creating ImageCard to display image posters when they aren't too large.
Removing archive.domain_id not null.
Reworking file refresh to process all files in a single directory.
Bumping version for major file rework.
No longer checking for video corruption.
Adding duration by default to speed up tests.
Using register_indexer for all indexers.
Adding CPU usage progress bar in Welcome.
Modifying TextIndexer to ignore large text files.
Counting all files during refresh.
Adding refresh_logger to clarify logging. Checking for wrol_mode before refresh functions.
Removing unused idempotency from video/channel tables.
Using magic module to speed up mimetype identification.
All tests pass.
Archive tests pass.
Changing video get endpoint to return 'file' to avoid ambiguity.
Video tests pass.
Simplifying regex filtering.
Using regex to ignore case when filtering.
Converting all channel classes to functions.
Restoring channel refresh and download buttons.
Matching format of Archive and Video pages.
Adding sorting to Archives search.
Reworking video orders for file search. Using SearchInput for videos search.
Archives can be searched on the Archives page. Domains can be filtered.
Reworking Archive search to use Files. Videos, Archives and Global search use the FilesView.
Videos are claimed by their Channel based on the Channel's directory. Prev and Next video cards are displayed on the VideoPage.
Creating useVideo for reworked VideoWrapper and VideoPage.
Adding Paginator to FilesView.
Moving file refresh button out of manage tab. Removing Files page tabs. Limiting refresh to one at a time.
Adding class for card icon to match poster height.
Video and Archives always re-claim their files on refresh.
Archive files are indexed and claimed.
FileView table is compact and striped.
Videos page uses FileView.
Updated navlinks to router v6.
Removing ! character from file names.
Disabling select button when cards are visible.
Adding show/hide button for FileTable selection.
The Archive Page is displayed.
Adding mimetype dropdown.
Upgrading to React Router v6 for useSearchParams.
Validating video during modeling. Removing screenshot during corruption check because it was very slow. Updating app to use video files as search results.
Updating video search to return Files.
Video and WROLPi tests pass.
Creating function to refresh files within a channel's directory.
Removing troubleshooting print. Updating result order in test.
Reworking video_factory to handle a specific video file location.
Returning video model on file search.
Getting session using video_file.
Screenshotting when checking for video corruption.
Reducing ffmpeg calls by gathering duration during poster generation.
Moving video file matching into model.
VideoIndexer is moved into video module. Video files are validated.
Moving files module into wrolpi in preparation to use it in modules.
Title and contents are indexed for text file.
Files are indexed on refresh by using their indexer.
Zip files are indexed using their contents.
Testing multiple zip files.
Adding unique to file.path. Checking that the correct indexer is used.
Adding index to file.modification_datetime and file.size.
Handling file info gathering in File.do_index. Only reading contents of file if file.indexed is False.
Video model is found during file refresh. A Video record is created that has the associated files.
Videos without associated files are found.
Videos are found using registered video_modeler() rather than in refresh code.
Removing old video columns.
Handling video info json files.
Trying to import each module individually. Will continue to import modules even if one fails.
Reworking refresh so it performs less DB calls.
Converting file.path to primary key.
file.path is always a pathlib.Path.
Updating video_factory to use new file system, testing it.
Bump sanic from 21.9.1 to 21.12.2 in /docker/archive
Bumps [sanic](https://github.com/sanic-org/sanic) from 21.9.1 to 21.12.2.
- [Release notes](https://github.com/sanic-org/sanic/releases)
- [Changelog](https://github.com/sanic-org/sanic/blob/main/CHANGELOG.rst)
- [Commits](https://github.com/sanic-org/sanic/compare/v21.9.1...v21.12.2)
---
updated-dependencies:
- dependency-name: sanic
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
