Add a Desktop toggle to the Controller (both UIs) that starts/stops
display-manager.service. Fail open: the unit is never enabled/disabled,
so the desktop always returns on reboot; users who want it disabled
across reboots can set the default target themselves.
Rename the hotspot and bluetooth actions to reflect their real behavior:
- enable/disable_hotspot -> start/stop_hotspot (/api/hotspot/start|stop)
- enable/disable_bluetooth -> unblock/block_bluetooth (rfkill semantics,
/api/bluetooth/unblock|block)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Probe the selected WiFi device with iw to determine which hotspot
protocols it can host: WPA2 requires AP mode; WPA3 requires SAE in AP
mode (SAE_OFFLOAD_AP, or a mac80211 driver with the CMAC cipher for
software SAE). The Raspberry Pi's brcmfmac supports neither, so Pis
correctly offer WPA2 only (verified against real Pi 4/Pi 5 iw output).
The protocol is saved as hotspot.protocol in controller.yaml.
enable_hotspot() now always sets the Hotspot connection's key-mgmt
explicitly (sae + required PMF for WPA3) so a reused profile cannot
keep a stale protocol, and reverts to WPA2 if the driver rejects SAE.
New GET /api/hotspot/protocols endpoint; protocol dropdowns added to
both the ControllerPage React UI and the fallback controller UI.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The RPi 5 fan connector exposes a tachometer via the pwmfan hwmon
device. Report it as fan_rpm in cpu_stats and show it in both the
Controller fallback UI and the React Status page. Hidden when no fan
is present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Review feedback: skip the service stop when the primary mount is already
unmounted (a no-op request must not cause an API outage), and restart
wrolpi-api (best effort) when umount fails since the drive is still
mounted and usable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Support swapping in a backup drive: /api/disks/unmount now accepts the
primary mount (previously rejected as reserved). It stops wrolpi-api so
open files are released, then umounts directly since the reconciler
never manages the primary mount. The /etc/fstab entry is left in place
so a reboot restores the mount.
Both UIs now offer Unmount for the primary mount and warn that the API
service will be stopped.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The React ControllerPage partitions services on `service.group`, but
ServiceStatusResponse did not declare the new kind/group fields, so
Pydantic silently stripped them from /api/services and the React UI
rendered one flat, ungrouped table. The fallback UI was unaffected
because it is server-rendered without the response model.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
POST /disks/mount wrote every mount into fstab.yaml and waited for the
reconciler — but the reconciler skips /media/wrolpi as a reserved mount
point, so mounting the primary drive from the Disks page could never
succeed and left a phantom fstab.yaml entry behind (visible as
"1 desired, 1 skipped: reserved mount point" in the journal). Mount the
primary drive directly via mount_drive() and persist it to /etc/fstab,
as onboarding does.
Phantom entries are now also invisible to the fstab list endpoint (they
were reported as active persistence) and are removed whenever the
primary mount is mounted, persisted, or un-persisted.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Disks page treated /media/wrolpi as fully protected, so a
manually-mounted primary drive could not be persisted from the UI — and
the Persist toggle would have been wrong anyway: it wrote fstab.yaml,
which the wrolpi-mounts reconciler refuses to apply for the primary
mount (RESERVED_MOUNT_POINTS). Route Persist for the primary mount to
the host's /etc/fstab (as onboarding does), report its entry in the
fstab list endpoint, and enable the toggle in both UIs while keeping
Unmount blocked. Mounts outside /media (e.g. /boot/efi, which showed
an Unmount button) are now entirely untouchable System mounts.
Also:
- Run `ntfsfix -d` before mounting ntfs/ntfs3 volumes so the Windows
dirty flag (Fast Startup, unclean unplug) cannot block mounting;
non-fatal and a no-op on clean volumes.
- Add uid/gid fstab options for ntfs/ntfs3, matching mount_drive().
- Log reconcile diagnostics (desired/already-mounted/skipped with
reasons) so an idle wrolpi-mounts run explains itself in the journal.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* POST /api/hotspot/settings checks is_docker_mode() directly instead of
string-matching the error message (still 500, matching the sibling
hotspot/bluetooth/throttle endpoints).
* Escape \ ; , " in the WiFi QR code per the WPA QR format.
* Skip the controller.yaml write when a settings update changes nothing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Hotspot was reported as "not supported" on x86 machines (Ubuntu/Debian PCs)
because the Controller only watched the hardcoded default wlan0 device, while
predictable interface naming produces names like wlp2s0. The Settings page
saved hotspot_device to wrolpi.yaml, which the Controller never read.
The Controller now owns hotspot settings in controller.yaml:
* New endpoints: GET/POST /api/hotspot/settings, GET /api/hotspot/devices
(WiFi interfaces discovered via nmcli).
* Legacy hotspot_* values in wrolpi.yaml are migrated into controller.yaml
once on startup, unless controller.yaml already sets them.
* The Hotspot SSID/password/device fields moved from the Settings page to the
Control page next to the Hotspot toggle; the device is now a dropdown of
the WiFi devices found on the machine.
* The Controller fallback UI gets the same hotspot settings form for parity.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The /api/disks/unmount endpoint only removed entries from fstab.yaml and
asked the reconciler to unmount, but the reconciler deliberately never
unmounts paths it has not claimed. Foreign mounts (udisks2 desktop
automounts, manual mounts) therefore could not be unmounted from the UI,
failing with a confusing "check journalctl" error.
- Fall back to a direct umount(8) when a reconcile leaves the requested
mount point live.
- Reject unmounting the primary WROLPi drive (/media/wrolpi) with a
clear 400, normalized to catch path traversal.
- Require the normalized mount point to be strictly under /media/
before any direct umount, since the fallback runs as root.
- Show "System" instead of an Unmount button for /media/wrolpi in both
the React UI and the Controller's simplified UI.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A WROLPi drive can move between hosts and across deployment styles
(Portable, RPi, Debian). /etc/fstab is host-specific and on the Portable
image it's part of a read-only squashfs, so persisting secondary mounts
there was both wrong-host and lost-on-reboot. This change makes
/media/wrolpi/config/fstab.yaml the single source of truth for WROLPi-
managed mounts and introduces a new wrolpi-mounts.service that reconciles
live state to match.
Architecture:
- The Controller writes intent (fstab.yaml) but never calls mount(8) or
umount(8) itself. Every mutation triggers `systemctl restart
wrolpi-mounts.service`; the Controller then verifies the outcome via
the same MountExecutor abstraction the service uses.
- wrolpi-mounts.service runs a thin entry point that constructs a real
Reconciler with a SubprocessMountExecutor and calls apply(). The
reconciler mounts what's in fstab.yaml but missing from the live state,
and unmounts paths it previously claimed that are no longer in
fstab.yaml. A managed-set file in /run/wrolpi-mounts/managed prevents
the reconciler from ever touching user-mounted paths it didn't own.
- One-time migration (marker-gated) lifts both /etc/fstab WROLPi entries
and any controller.yaml drives.mounts entries into fstab.yaml.
/etc/fstab is backed up to /etc/fstab.wrolpi-migration.backup;
migrated lines are commented in place with a "migrated to fstab.yaml:"
prefix so a host admin can hand-recover.
Test approach: dependency injection in place of patching. The
MountExecutor protocol has SubprocessMountExecutor (production) and
FakeMountExecutor (in-memory, records calls). The Reconciler accepts an
executor in its constructor, so the 20 reconciler tests + 13 migration
tests + 18 fstab_yaml tests use real files in tmp_path with zero
mock.patch calls. test_disks_api.py drops to mocks only for the
host-touching read helpers; the mount/unmount paths now run the real
Reconciler against the fake executor.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Introduce an onboarding system in the Controller that guides users
through selecting and mounting their primary media drive. This is
the fallback UI flow used when the main React app is unavailable.
Key changes:
- Add onboarding API endpoints and schemas (controller/api/onboarding.py)
- Add onboarding logic to detect drives, handle already-mounted drives
(needed for RPi which auto-mounts), and save primary drive selection
to the controller config when no mounts are configured
- Extend the Controller's index.html template with the onboarding UI
- Skip root cert creation until onboarding is complete
- Update first_startup.sh to support the onboarding/repair flow
- Add comprehensive tests for onboarding logic and API
