The RPi 5 fan connector exposes a tachometer via the pwmfan hwmon
device. Report it as fan_rpm in cpu_stats and show it in both the
Controller fallback UI and the React Status page. Hidden when no fan
is present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Support swapping in a backup drive: /api/disks/unmount now accepts the
primary mount (previously rejected as reserved). It stops wrolpi-api so
open files are released, then umounts directly since the reconciler
never manages the primary mount. The /etc/fstab entry is left in place
so a reboot restores the mount.
Both UIs now offer Unmount for the primary mount and warn that the API
service will be stopped.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Controller listed every wrolpi-* service in one flat table, which was
confusing for new users who couldn't tell always-on infrastructure from
one-off/dev/maintenance units.
Services are now split into two groups computed once in the backend and
exposed as `service.group`:
* Core Services - persistent services enabled at boot (api, app, caddy,
kiwix, ...), the normal running system.
* Optional & Maintenance - one-off/dev/maintenance tasks (bootstrap, repair,
upgrade, *-dev, discovered wrolpi-*), plus persistent
services the user has disabled at boot (e.g. Samba with
no shares configured).
Rule: core iff kind == "persistent" and enabled; otherwise optional. Group
membership only changes when the user toggles Boot, never on start/stop or
polling, so rows stay put. Within each group, failed/stopped services sort
first so problems stay visible.
Feature parity across all three render paths: the React ControllerPage, the
server-side Jinja template, and the client-side poll refresh. Docker
containers have no group field and fall back to a single ungrouped list.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
During onboarding the media drive is not mounted and ca.crt does not exist
yet (or still holds only a throwaway pre-drive state). The cert banner still
offered Download WROLPi Root CA, which 404'd. Gate the button and HTTPS
cert-setup banner on drive mounted, ca.crt present, and repair not running
so an existing CA on the drive can be served after mount/repair.
A new wrolpi-help-script.service oneshot runs /opt/wrolpi/help.sh so the
Controller UI can run system diagnostics and show the output from the
journal. The confirmation modal hides the warnings block for scripts
with no warnings.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Disks page treated /media/wrolpi as fully protected, so a
manually-mounted primary drive could not be persisted from the UI — and
the Persist toggle would have been wrong anyway: it wrote fstab.yaml,
which the wrolpi-mounts reconciler refuses to apply for the primary
mount (RESERVED_MOUNT_POINTS). Route Persist for the primary mount to
the host's /etc/fstab (as onboarding does), report its entry in the
fstab list endpoint, and enable the toggle in both UIs while keeping
Unmount blocked. Mounts outside /media (e.g. /boot/efi, which showed
an Unmount button) are now entirely untouchable System mounts.
Also:
- Run `ntfsfix -d` before mounting ntfs/ntfs3 volumes so the Windows
dirty flag (Fast Startup, unclean unplug) cannot block mounting;
non-fatal and a no-op on clean volumes.
- Add uid/gid fstab options for ntfs/ntfs3, matching mount_drive().
- Log reconcile diagnostics (desired/already-mounted/skipped with
reasons) so an idle wrolpi-mounts run explains itself in the journal.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Hotspot was reported as "not supported" on x86 machines (Ubuntu/Debian PCs)
because the Controller only watched the hardcoded default wlan0 device, while
predictable interface naming produces names like wlp2s0. The Settings page
saved hotspot_device to wrolpi.yaml, which the Controller never read.
The Controller now owns hotspot settings in controller.yaml:
* New endpoints: GET/POST /api/hotspot/settings, GET /api/hotspot/devices
(WiFi interfaces discovered via nmcli).
* Legacy hotspot_* values in wrolpi.yaml are migrated into controller.yaml
once on startup, unless controller.yaml already sets them.
* The Hotspot SSID/password/device fields moved from the Settings page to the
Control page next to the Hotspot toggle; the device is now a dropdown of
the WiFi devices found on the machine.
* The Controller fallback UI gets the same hotspot settings form for parity.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Surface coarse SMART health for USB-bridge drives
USB enclosures that reject ATA pass-through (e.g. Seagate Expansion) are
invisible to pySMART/DeviceList, so the drive shows no SMART at all on the
Controller page. Fall back to smartctl over the SCSI transport, which many
such bridges still answer, to report a coarse PASS/FAIL health plus drive
identity (model/serial/capacity).
The health (-d scsi -H) and identity (-d scsi -i) reads are issued as
separate calls: combining them makes smartctl suppress the health line when
the identity read reports "SMART support is: Unavailable" (which these
bridges do). The entry is marked smart_limited (labelled "(limited)" in both
UIs) so a green PASS is not mistaken for full monitoring — these drives
expose no attributes or temperature, and some bridges report "OK" statically.
* Harden SCSI health fallback (Greptile review)
- _scsi_health: treat any unrecognised status (e.g. "UNKNOWN", "N/A") as
unreadable (None) instead of a false FAIL. Only "OK" -> PASS and "FAIL*"
-> FAIL; anything else omits the drive rather than showing a red FAIL that
contradicts the smart_limited disclaimer.
- get_all_smart_status: isolate the SCSI supplement loop in its own
try/except so an error there cannot discard the pySMART results already
collected.
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The /api/disks/unmount endpoint only removed entries from fstab.yaml and
asked the reconciler to unmount, but the reconciler deliberately never
unmounts paths it has not claimed. Foreign mounts (udisks2 desktop
automounts, manual mounts) therefore could not be unmounted from the UI,
failing with a confusing "check journalctl" error.
- Fall back to a direct umount(8) when a reconcile leaves the requested
mount point live.
- Reject unmounting the primary WROLPi drive (/media/wrolpi) with a
clear 400, normalized to catch path traversal.
- Require the normalized mount point to be strictly under /media/
before any direct umount, since the fallback runs as root.
- Show "System" instead of an Unmount button for /media/wrolpi in both
the React UI and the Controller's simplified UI.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Map viewer has simple search.
Map search databases can be downloaded from CDN, or built locally. Map searches can be built offline, but will not have enriched things like state names downloaded from Wikidata.
Introduce an onboarding system in the Controller that guides users
through selecting and mounting their primary media drive. This is
the fallback UI flow used when the main React app is unavailable.
Key changes:
- Add onboarding API endpoints and schemas (controller/api/onboarding.py)
- Add onboarding logic to detect drives, handle already-mounted drives
(needed for RPi which auto-mounts), and save primary drive selection
to the controller config when no mounts are configured
- Extend the Controller's index.html template with the onboarding UI
- Skip root cert creation until onboarding is complete
- Update first_startup.sh to support the onboarding/repair flow
- Add comprehensive tests for onboarding logic and API
