On a Debian install the onboarding wizard offered the EFI system partition
(unlabeled vfat at /boot/efi) as the primary WROLPi drive; choosing it would
mount the boot partition over /media/wrolpi. Candidates were filtered by
the "EFI" label only, and the Debian installer leaves the ESP unlabeled.
/boot/efi is now an excluded mountpoint, and partitions with the EFI system
partition type (GPT GUID or MBR 0xef, from lsblk PARTTYPE) are excluded even
when unmounted, e.g. on a second internal disk.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
"Run repair without external drive" kept the library on the internal disk,
but the API's unmounted-media guard refuses to create or use a database
beneath /media/wrolpi when it is not a mount. After onboarding without a
drive the API restarted forever with no database, and downloads were
blocked as "media not mounted".
The Controller now records the choice as drives.library_on_internal_disk in
controller.yaml -- the only source of it. The database guard and the
media_mounted check both read that marker, so require_media_mounted keeps
its meaning and needs no change. Onboarding a drive later clears the
marker, so it is never copied onto the drive.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Nothing started the hotspot since hotspot_on_startup moved out of the
API, and NetworkManager does not autoconnect the Hotspot connection.
The Controller now starts it once per boot unless hotspot.on_startup is
false; a legacy wrolpi.yaml hotspot_on_startup: false is migrated.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The onboarding wizard deleted /media/wrolpi/config before mounting a
drive, and the shadowed data check ignored config/. A library kept on
the internal disk keeps wrolpi.db and its configs there, so onboarding
a drive later deleted them without warning. Only a config/ holding
nothing but the ssl/ CA is now treated as transient.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
wrolpi-bootstrap.sh created controller.yaml on installed systems, which
hid the onboarding wizard. Installed systems now wait for the wizard,
whose repair.sh finishes setup.
"Run repair without external drive" now writes controller.yaml before
starting repair, so the wizard does not return after repair.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
systemd prints the start timestamp in local time, which was subtracted from
utcnow(), so elapsed_seconds was off by the UTC offset (6 hours in MDT). Ask
systemd for a Unix timestamp instead.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hotspot captive portal: welcome page with the WROLPi's address
Devices that join the hotspot probe a fixed plain-HTTP URL to check for
Internet access. NetworkManager's shared-mode dnsmasq now resolves those
probe hostnames (and `wrolpi`) to the hotspot address via an include the
Controller writes when the hotspot starts, the probes land on the Controller
(port 80), and are redirected to /portal: "This is your WROLPi, its address is
10.42.0.1, open WROLPi / open the Controller".
Only the probe hostnames are hijacked so the hotspot keeps forwarding
everything else when the WROLPi has an uplink. The include is corrected and
the connection re-activated once if NetworkManager picked a non-default
subnet. Writing the include is best-effort; the hotspot starts regardless.
`hotspot.captive_portal` (controller.yaml, default true) toggles the probe
redirects and the include; like the other hotspot settings it applies on the
next hotspot start, so saving while the hotspot is up reports
restart_required and both Controller UIs say so. The status endpoint gains
the hotspot address and portal URL, shown in both UIs. repair.sh only
creates the include directory so a disabled setting survives upgrades.
Native only: Docker has no hotspot.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* captive portal: address review
* React: re-read the hotspot address whenever the HotspotToggle starts or
stops the hotspot, matching the fallback UI's refresh-on-status.
* A WPA3 start that reverts to WPA2 leaves the hotspot up, so it now gets
the captive portal address correction too.
* The corrective `nmcli connection up` logs a warning on a non-zero exit;
dnsmasq would otherwise keep the old address silently.
* HotspotStatusResponse.captive_portal defaults to true like everywhere else.
* Trim design narrative from the module docstring and React comments.
* The include-before-activate test now observes the include at the moment
of the `nmcli ... hotspot` call instead of inferring from call order.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* captive portal: never forward any record type for probe hosts
`address=` only synthesizes A/AAAA answers. iOS also asks for the HTTPS
record type; dnsmasq forwarded that upstream, Apple's answer aliased to
captive.g.aaplimg.com, and the phone fetched the genuine "Success" from
Apple instead of the portal. Each probe host now also gets `local=`, so
dnsmasq answers every type itself, and the CDN alias is a probe host too.
Observed with dnsmasq query logging on a hotspot with an eth0 uplink.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* captive portal: let acknowledged clients finish so the OS offers "Done"
A phone's sign-in sheet only shows "Done" once the OS re-probes and gets
the genuine success reply. The Controller now remembers each client (by
hotspot IP) that has loaded the portal page and answers its later probes
with the reply each OS expects (Apple "Success" HTML, Android 204, Windows
"Microsoft Connect Test", ...). The set is cleared when the hotspot
starts so a new session shows the page again.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* captive portal: acknowledge on Continue, not on view
iOS fetches the portal page in the background before opening the sheet,
then re-probes after the sheet's own navigation. Acknowledging on view
made that re-probe return "Success" as the sheet's content. Phones only
re-check the network (and offer "Done") after a full-page navigation, so
the welcome page now has a Continue button leading to /portal/continue,
which is the only place a client is acknowledged. The Continue page says
to tap Done and links to WROLPi and the Controller.
Also hijack clients3.google.com (older Android probe host).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* help: bump wrolpi-help to the captive portal and Speed Test docs
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* captive portal: comments describe the Continue design; clear acks on stop
Three comments still described acknowledging on view, which c72a7f7b
removed. Acknowledged clients are now also cleared when the hotspot
stops, so a lease reused in a later session sees the portal page.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
The Hotspot, Bluetooth, Desktop, VNC and Throttle toggles had each been written
out longhand at four layers. Collapse the shared parts:
- useSubsystemToggle() replaces five near-identical hooks. This also fixes a
latent bug: only useDesktop/useVnc restored state when a request failed, so a
failed Bluetooth/Throttle/Hotspot toggle left at null and — since the
status poll sees no change — the toggle stayed disabled and read as
unsupported until it remounted.
- SubsystemToggle renders all five, with the Desktop's stop confirmation and
VNC's desktop gating as declared options rather than bespoke copies.
- The fallback UI's four update*/toggle* pairs become one config-driven
implementation (-100 lines).
- _raise_for_action() centralises the 13 endpoint failure checks, including
VNC's 409-vs-500 split.
Deliberately not shared: the six get_*_status_dict() builders (payloads
genuinely differ) and the per-subsystem mechanisms (nmcli/rfkill/sysfs/systemctl).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Greptile P1 (security): with both stacks installed, selection keyed only off
wayvnc's unit and config. If RealVNC was the one running, status reported VNC
as off and stop targeted wayvnc — leaving the screen remotely accessible while
the UI claimed VNC was off. Reproduced on 10.0.0.8: RealVNC serving on 5900
reported as running=false.
Now every installed backend is reported with its own active state: status is on
when any backend runs and names the one actually serving, and stop stops all
running backends. wayvnc is still preferred for starting.
Greptile P2 (latency): both units are probed in a single multi-unit
`systemctl show`, and the status dict no longer re-probes, so VNC adds one
subprocess to /api/stats rather than three.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add a VNC toggle to the Controller (both UIs) that starts/stops whichever VNC
backend is installed: wayvnc for Wayland (Raspberry Pi OS), RealVNC for X11.
Runtime-only, like the Desktop toggle: the unit is never enabled, so VNC does
not return after a reboot. Users who want it permanently on can enable it with
raspi-config.
VNC serves the desktop session, so starting it without a desktop gives clients
a blank screen. The gate lives in the backend, not just the UI, so curl callers
get it too (409, distinct from a systemctl failure). Stopping is never gated so
a running VNC server can't be stranded on with no way to turn it off.
Backend selection deliberately avoids raspi-config's live-compositor probe
(pgrep labwc), which reports X11 — and would pick the wrong backend — whenever
the desktop is stopped. wayvnc also requires its config to exist; that is
checked directly rather than via the unit's ConditionResult, which reports 'no'
for any unit that has never been started.
Extracts _unit_properties()/_systemctl_unit() so Desktop and VNC share one
systemd probe and start/stop path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Stopping the display manager left the Pi's monitor black with only a blinking
cursor. The console VT is already in the foreground with a getty and a live
shell on it (verified: /dev/vcs1 holds the login banner and prompt) — the
display manager just hands the display back without the console being
repainted, so nothing is visible.
Activate the console VT, then bounce off another VT to force a modeset and
redraw, and print a short message telling the user the Controller stopped the
desktop and how to start it again.
Best-effort throughout: skipped when no getty is on the console VT, a chvt or
console-write failure never fails the stop, and being stranded on the repaint
VT is reported rather than claimed as success. Verified on 10.0.0.8 hardware.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
git rev-parse --abbrev-ref HEAD reports "heads/release" when a stale
tag named release exists alongside the release branch (tags outrank
heads in git ref resolution). check_for_update then looked up the
nonexistent origin/heads/release and permanently reported no updates
available, and the Controller UI pre-filled "heads/release" as the
upgrade branch.
Use git branch --show-current everywhere instead; it never
disambiguates. A detached HEAD (empty output) now defaults to the
release branch for upgrades; a genuine git failure still returns None.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add a Desktop toggle to the Controller (both UIs) that starts/stops
display-manager.service. Fail open: the unit is never enabled/disabled,
so the desktop always returns on reboot; users who want it disabled
across reboots can set the default target themselves.
Rename the hotspot and bluetooth actions to reflect their real behavior:
- enable/disable_hotspot -> start/stop_hotspot (/api/hotspot/start|stop)
- enable/disable_bluetooth -> unblock/block_bluetooth (rfkill semantics,
/api/bluetooth/unblock|block)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Reset a saved protocol the newly probed device does not support
instead of offering it (both UIs); a successful probe is
authoritative, the saved value is only kept when probing fails.
- Ignore out-of-order protocol probe responses when switching devices
quickly (both UIs).
- Verify the WPA2 rollback after a failed WPA3 activation; report that
the hotspot may be down instead of claiming the revert succeeded.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Probe the selected WiFi device with iw to determine which hotspot
protocols it can host: WPA2 requires AP mode; WPA3 requires SAE in AP
mode (SAE_OFFLOAD_AP, or a mac80211 driver with the CMAC cipher for
software SAE). The Raspberry Pi's brcmfmac supports neither, so Pis
correctly offer WPA2 only (verified against real Pi 4/Pi 5 iw output).
The protocol is saved as hotspot.protocol in controller.yaml.
enable_hotspot() now always sets the Hotspot connection's key-mgmt
explicitly (sae + required PMF for WPA3) so a reused profile cannot
keep a stale protocol, and reverts to WPA2 if the driver rejects SAE.
New GET /api/hotspot/protocols endpoint; protocol dropdowns added to
both the ControllerPage React UI and the fallback controller UI.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The RPi 5 firmware stops the fan entirely when cool, so a 0 RPM
reading is normal and must not be hidden. On multi-fan machines,
prefer a CPU-labeled hwmon group over faster case fans.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The RPi 5 fan connector exposes a tachometer via the pwmfan hwmon
device. Report it as fan_rpm in cpu_stats and show it in both the
Controller fallback UI and the React Status page. Hidden when no fan
is present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Review feedback: skip the service stop when the primary mount is already
unmounted (a no-op request must not cause an API outage), and restart
wrolpi-api (best effort) when umount fails since the drive is still
mounted and usable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Support swapping in a backup drive: /api/disks/unmount now accepts the
primary mount (previously rejected as reserved). It stops wrolpi-api so
open files are released, then umounts directly since the reconciler
never manages the primary mount. The /etc/fstab entry is left in place
so a reboot restores the mount.
Both UIs now offer Unmount for the primary mount and warn that the API
service will be stopped.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The React ControllerPage partitions services on `service.group`, but
ServiceStatusResponse did not declare the new kind/group fields, so
Pydantic silently stripped them from /api/services and the React UI
rendered one flat, ungrouped table. The fallback UI was unaffected
because it is server-rendered without the response model.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Controller listed every wrolpi-* service in one flat table, which was
confusing for new users who couldn't tell always-on infrastructure from
one-off/dev/maintenance units.
Services are now split into two groups computed once in the backend and
exposed as `service.group`:
* Core Services - persistent services enabled at boot (api, app, caddy,
kiwix, ...), the normal running system.
* Optional & Maintenance - one-off/dev/maintenance tasks (bootstrap, repair,
upgrade, *-dev, discovered wrolpi-*), plus persistent
services the user has disabled at boot (e.g. Samba with
no shares configured).
Rule: core iff kind == "persistent" and enabled; otherwise optional. Group
membership only changes when the user toggles Boot, never on start/stop or
polling, so rows stay put. Within each group, failed/stopped services sort
first so problems stay visible.
Feature parity across all three render paths: the React ControllerPage, the
server-side Jinja template, and the client-side poll refresh. Docker
containers have no group field and fall back to a single ungrouped list.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
During onboarding the media drive is not mounted and ca.crt does not exist
yet (or still holds only a throwaway pre-drive state). The cert banner still
offered Download WROLPi Root CA, which 404'd. Gate the button and HTTPS
cert-setup banner on drive mounted, ca.crt present, and repair not running
so an existing CA on the drive can be served after mount/repair.
Drop .pgpass handling, Postgres ownership repairs, and the docker db
container viewability rules. Update comments and pi-gen map docs for
SQLite/PMTiles. Help submodule documents the new database layout.
The database now lives at <media>/config/wrolpi.db so a library (files,
configs, AND database) travels with the drive between WROLPi systems.
Core:
- wrolpi/db.py: lazy SQLite engine factory (WAL, busy_timeout=30s,
foreign_keys=ON); get_db_curs yields a plain sqlite3.Cursor; native
sqlite3 paramstyle everywhere (no compatibility shims); global sqlite3
adapters keep raw-SQL datetime formats identical to the ORM's.
- wrolpi/fts.py: FTS5 external-content search replacing tsvector/GIN.
Injection-proof websearch->FTS5 translator, bm25(10,4,2,1) reproducing
A/B/C/D weighting, fast(abc)/deep column filtering, snippet headlines.
Stemming contract pinned by dedicated tests (watch/watches/watched/
watching are interchangeable).
- wrolpi/schema_ddl.py: SQLite triggers shared verbatim by the alembic
baseline and test DBs; fixes the channel video_count DELETE/UPDATE
bugs and a latent total_size bug (it used the video id as channel id).
- wrolpi/db_bootstrap.py: startup auto-create/migrate; refuses databases
written by a newer WROLPi (db_version_mismatch); SQLite 3.40 floor;
network-filesystem refusal; never creates/migrates/trusts a database
beneath an unmounted production media directory (shadow-DB guard).
- Alembic: 85 Postgres-era migrations squashed into one baseline;
revision ids are dates (2026_07_10_1350) so filenames self-sort and
alembic_version says when a schema was created; render_as_batch=True.
- All raw Postgres SQL rewritten (ANY->json_each IN, array_agg @> ->
HAVING COUNT(DISTINCT), unnest->executemany/UPDATE..FROM,
generate_series histograms->strftime GROUP BY, DISTINCT ON->
row_number(), writable CTEs->two statements, jsonb_*->json_*, explicit
NULLS FIRST/LAST, LIMIT-before-OFFSET). Simple statements converted
to SQLAlchemy instead (flag upsert, download retry/summary/tag checks,
channel-by-tag estimate, Directory delete).
- Config imports count skipped entries; background dumps are blocked
after a lossy import so partial imports can never overwrite YAML
configs (they are the sole source of truth for rebuilds now).
- Search tolerates explicit JSON nulls for limit/offset (Postgres
treated OFFSET NULL as 0; SQLite errors).
- file_group.id/doc_section.id render as INTEGER PRIMARY KEY on SQLite
(BIGINT is not a rowid alias; FTS5 content_rowid requires it).
Ops teardown: docker-compose db service, CI postgres sidecars,
initialize_api_db.sh, controller postgresql service, psycopg2-binary all
removed. upgrade.sh stops/disables postgresql (data is NOT deleted;
`systemctl enable --now postgresql` restores it); systemd units no
longer Want postgresql.service.
Existing-user upgrade: first boot creates+migrates the DB, configs
import (tags recreate their FileGroups from disk), a refresh rebuilds
the library index. QA'd on the 10.0.0.8 RPi: rebuild matched the
Postgres baseline exactly; survived an uncontrolled hard reboot with
clean integrity checks.
Accepted behavior changes: FTS5 has no stopwords; bm25 length
normalization shifts some rank orders; fast-path d_headline is
un-highlighted; all-negative queries match nothing.
Deferred: Debian/trixie package lists (incl. sqlite3 CLI), Cypress
re-baseline, VACUUM INTO snapshots, exFAT/NTFS warning, auto-kicked
rebuild refresh with progress UX.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A new wrolpi-help-script.service oneshot runs /opt/wrolpi/help.sh so the
Controller UI can run system diagnostics and show the output from the
journal. The confirmation modal hides the warnings block for scripts
with no warnings.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
show_only_when_running hid wrolpi-upgrade the moment it exited — exactly
when its logs matter after a failed upgrade — and hid wrolpi-api-dev
whenever it was stopped. Reinterpret the flag: hide a service only when
its unit is not installed on the box (LoadState=not-found). Discovery
now unions loaded units (--all, catching transient and exited units)
with installed unit files, and discovered services are listed regardless
of running state.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
QA on 10.0.0.8 (mount-issues.md findings 2 and 3) showed the reconciler
path missed both NTFS accommodations that mount_drive() and
add_fstab_entry() already have: secondary NTFS drives mounted owned by
root (writable only via ntfs-3g's permissive default), and a dirty NTFS
volume would fail to mount at boot with no cleanup attempted.
Inject uid/gid for ntfs/ntfs3 in the reconciler, and run ntfsfix -d in
SubprocessMountExecutor before NTFS mounts (translating UUID=/LABEL=
specs to /dev/disk/by-* paths, which ntfsfix needs). Also return an
error MountResult instead of raising when a binary is missing, per the
executor protocol.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
POST /disks/mount wrote every mount into fstab.yaml and waited for the
reconciler — but the reconciler skips /media/wrolpi as a reserved mount
point, so mounting the primary drive from the Disks page could never
succeed and left a phantom fstab.yaml entry behind (visible as
"1 desired, 1 skipped: reserved mount point" in the journal). Mount the
primary drive directly via mount_drive() and persist it to /etc/fstab,
as onboarding does.
Phantom entries are now also invisible to the fstab list endpoint (they
were reported as active persistence) and are removed whenever the
primary mount is mounted, persisted, or un-persisted.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Disks page treated /media/wrolpi as fully protected, so a
manually-mounted primary drive could not be persisted from the UI — and
the Persist toggle would have been wrong anyway: it wrote fstab.yaml,
which the wrolpi-mounts reconciler refuses to apply for the primary
mount (RESERVED_MOUNT_POINTS). Route Persist for the primary mount to
the host's /etc/fstab (as onboarding does), report its entry in the
fstab list endpoint, and enable the toggle in both UIs while keeping
Unmount blocked. Mounts outside /media (e.g. /boot/efi, which showed
an Unmount button) are now entirely untouchable System mounts.
Also:
- Run `ntfsfix -d` before mounting ntfs/ntfs3 volumes so the Windows
dirty flag (Fast Startup, unclean unplug) cannot block mounting;
non-fatal and a no-op on clean volumes.
- Add uid/gid fstab options for ntfs/ntfs3, matching mount_drive().
- Log reconcile diagnostics (desired/already-mounted/skipped with
reasons) so an idle wrolpi-mounts run explains itself in the journal.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* POST /api/hotspot/settings checks is_docker_mode() directly instead of
string-matching the error message (still 500, matching the sibling
hotspot/bluetooth/throttle endpoints).
* Escape \ ; , " in the WiFi QR code per the WPA QR format.
* Skip the controller.yaml write when a settings update changes nothing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Hotspot was reported as "not supported" on x86 machines (Ubuntu/Debian PCs)
because the Controller only watched the hardcoded default wlan0 device, while
predictable interface naming produces names like wlp2s0. The Settings page
saved hotspot_device to wrolpi.yaml, which the Controller never read.
The Controller now owns hotspot settings in controller.yaml:
* New endpoints: GET/POST /api/hotspot/settings, GET /api/hotspot/devices
(WiFi interfaces discovered via nmcli).
* Legacy hotspot_* values in wrolpi.yaml are migrated into controller.yaml
once on startup, unless controller.yaml already sets them.
* The Hotspot SSID/password/device fields moved from the Settings page to the
Control page next to the Hotspot toggle; the device is now a dropdown of
the WiFi devices found on the machine.
* The Controller fallback UI gets the same hotspot settings form for parity.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Surface coarse SMART health for USB-bridge drives
USB enclosures that reject ATA pass-through (e.g. Seagate Expansion) are
invisible to pySMART/DeviceList, so the drive shows no SMART at all on the
Controller page. Fall back to smartctl over the SCSI transport, which many
such bridges still answer, to report a coarse PASS/FAIL health plus drive
identity (model/serial/capacity).
The health (-d scsi -H) and identity (-d scsi -i) reads are issued as
separate calls: combining them makes smartctl suppress the health line when
the identity read reports "SMART support is: Unavailable" (which these
bridges do). The entry is marked smart_limited (labelled "(limited)" in both
UIs) so a green PASS is not mistaken for full monitoring — these drives
expose no attributes or temperature, and some bridges report "OK" statically.
* Harden SCSI health fallback (Greptile review)
- _scsi_health: treat any unrecognised status (e.g. "UNKNOWN", "N/A") as
unreadable (None) instead of a false FAIL. Only "OK" -> PASS and "FAIL*"
-> FAIL; anything else omits the drive rather than showing a red FAIL that
contradicts the smart_limited disclaimer.
- get_all_smart_status: isolate the SCSI supplement loop in its own
try/except so an error there cannot discard the pySMART results already
collected.
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Warn in the navbar when a hard drive runs hot.
The navbar already warns about high CPU temperature; add the equivalent
for drive temperature, since an overheating disk risks data loss and a
user running an off-grid library won't be watching for it.
- controller/lib/smart.py: build_smart_stats() returns the per-drive list
plus warning thresholds (55C warn / 65C critical) so the frontend stays
dumb. Reading SMART wakes a spun-down drive, so drives in standby are
detected with `smartctl -n standby` (which works through the USB-SATA
bridges where `hdparm -C` only reports "unknown") and NOT read; their
last-known reading is reused instead.
- controller/lib/status_worker.py: collect SMART on a slow 60s cadence
(cached on app.state) rather than the 5s status loop, so the poll does
not keep USB drives awake. The result flows into the same cached payload
via a new collect_all_status(smart_stats=...) kwarg.
- Frontend: useDriveTemperature() reports the hottest drive; Nav.js shows
a yellow/red `hdd` icon with a popup, mirroring the CPU warning.
Verified on hardware: smart_stats reports real temps and SMART runs once
a minute, not every 5s.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Address Greptile review on HDD temperature warning.
- _drive_is_asleep also treats SLEEP mode as asleep, not just STANDBY.
smartctl -n standby exits "Device is in SLEEP mode, exit(2)" for the
deeper power mode; matching only "STANDBY" meant a SLEEP drive was read
and woken — the exact failure the check prevents. (TDD: added a failing
SLEEP test, then fixed.)
- useDriveTemperature uses ?? instead of || for the temperature fallback
to express "fall back only on null/undefined".
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Applied directly since the dependabot PR could not auto-rebase after the
grouped merges.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
