wrolpi/app
lrnselfreliance 8cfe36b3ea
A secondary syncs by rsync: the Controller runs it on its schedule, and both pages follow it (#995)
* A secondary syncs by rsync: the Controller runs it on its schedule, and both pages follow it

The third part of replacing the sync.

- The Controller syncs within the daily window (every 15 minutes after the last sync finished, in WROLPi's
  timezone), as the API did.  The API's loop no longer runs the old engine, and its /api/sync/run and
  /api/sync/cancel ask the Controller.
- The Sync page and the overlay that covers the app read the sync's status from the Controller, which is the only
  one that can answer while the API is stopped.  The overlay is also shown when the settings cannot be read, as
  happens while the API is stopped.  Sync Now and Stop go to the Controller.
- The Controller's fallback page, where Caddy sends the browser while the API is down, shows the sync's progress
  and a Stop button.
- New on the Sync page: how long files the primary deletes are kept (30 days by default, or never), and a note that
  an excluded folder's files are still listed on a secondary.

The old engine's code is removed in the next part.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Remove SyncRunRequest, unused since a sync is asked of the Controller

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* In Docker, a sync's progress moves while a large file is copied

Docker's logs hold a line until it ends, and rsync's progress for one large file is a single line rewritten with
carriage returns, so the page showed 0% until the file was done (hours, for a large map).  The rsync helper's
output is now read by attaching to it, before it is started so that nothing is missed.

Found by a sync between two Docker WROLPis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A sync is recovered before the schedule can start another, and an empty days value is refused

Review found:

- The schedule and the recovery of an interrupted sync started side by side when the Controller started.  The state
  an interrupted sync leaves is due, so inside the window a new sync could start while the recovery restarted the
  API and wrote over the new sync's status.  Every tick of the schedule now recovers first, and only a status of
  "running" with no sync holding the lock counts as interrupted.  A sync records its outcome before it frees the
  lock, so a tick between the two cannot mistake it for an interrupted one.
- The Controller may start before the drive is mounted.  The empty record it read then was kept and saved over the
  real one, losing the last successful sync.  The state file is now read again until it can be.
- A cleared number of days was saved as 0, which empties the trash at the next sync.  It is now refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-19 15:06:25 -07:00
..
cypress The map draws its own icons on an overlay (#967) 2026-11-13 17:59:21 -07:00
jest 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
public Resume EPUBs and comic books where the reader left off (#798) 2026-10-08 18:19:51 -06:00
scripts ui: the last of Semantic UI, in name and in dead CSS 2026-08-08 18:05:54 -06:00
src A secondary syncs by rsync: the Controller runs it on its schedule, and both pages follow it (#995) 2026-11-19 15:06:25 -07:00
.gitignore A new start 2021-11-01 16:43:09 -06:00
cypress.config.js The standalone map viewer draws overlays, as the map does (#966) 2026-11-13 17:28:41 -07:00
package-lock.json build(deps): bump node-forge from 1.4.0 to 1.4.3 in /app (#964) 2026-11-14 11:18:16 -07:00
package.json The standalone map viewer draws overlays, as the map does (#966) 2026-11-13 17:28:41 -07:00
README.md Fixing bug where file search would issue twice on load. 2023-04-09 14:34:33 -06:00
serve.json Adding serve.json so epub.html is not rewritten by serve. Buildling app during pi-gen/debian image builds. 2025-03-13 19:34:28 -06:00
tsconfig.json test: the component suite has not run since cypress 15, on any machine (#661) 2026-08-12 21:57:07 -06:00

Getting Started with Create React App

This project was bootstrapped with Create React App.

Available Scripts

In the project directory, you can run:

npm start

Runs the app in the development mode.
Open http://localhost:3000 to view it in your browser.

The page will reload when you make changes.
You may also see any lint errors in the console.

npm test

Launches the test runner in the interactive watch mode.
See the section about running tests for more information.

npm run build

Builds the app for production to the build folder.
It correctly bundles React in production mode and optimizes the build for the best performance.

The build is minified and the filenames include the hashes.
Your app is ready to be deployed!

See the section about deployment for more information.

npm run eject

Note: this is a one-way operation. Once you eject, you can't go back!

If you aren't satisfied with the build tool and configuration choices, you can eject at any time. This command will remove the single build dependency from your project.

Instead, it will copy all the configuration files and the transitive dependencies (webpack, Babel, ESLint, etc) right into your project so you have full control over them. All of the commands except eject will still work, but they will point to the copied scripts so you can tweak them. At this point you're on your own.

You don't have to ever use eject. The curated feature set is suitable for small and middle deployments, and you shouldn't feel obligated to use this feature. However we understand that this tool wouldn't be useful if you couldn't customize it when you are ready for it.

Learn More

You can learn more in the Create React App documentation.

To learn React, check out the React documentation.

Code Splitting

This section has moved here: https://facebook.github.io/create-react-app/docs/code-splitting

Analyzing the Bundle Size

This section has moved here: https://facebook.github.io/create-react-app/docs/analyzing-the-bundle-size

Making a Progressive Web App

This section has moved here: https://facebook.github.io/create-react-app/docs/making-a-progressive-web-app

Advanced Configuration

This section has moved here: https://facebook.github.io/create-react-app/docs/advanced-configuration

Deployment

This section has moved here: https://facebook.github.io/create-react-app/docs/deployment

npm run build fails to minify

This section has moved here: https://facebook.github.io/create-react-app/docs/troubleshooting#npm-run-build-fails-to-minify