* Speed Test calculator: ping, download, and upload against the API Users asking whether the hotspot is fast enough, or how many people can stream video at once, had no objective tool that works offline. This adds one under Calculators > Tools & Reference. Backend (wrolpi/speedtest.py, /api/speedtest): * ping: tiny no-store JSON the browser times for round trip latency. * download: streams slices of a pre-built random buffer for a clamped number of seconds (0.1-15). Random so no proxy or compression can flatter the result; slices so no bytes are generated per request. * upload: streaming-body handler that reads and discards the body and reports bytes and elapsed time. Requests over 8 MiB are refused. * info: the client address Caddy forwarded plus how many tests are in flight. Sanic now trusts one proxy hop (PROXIES_COUNT = 1) so request.remote_addr is the browser, not Caddy. Nothing else read that field before. There is deliberately no one-test-at-a-time lock. Several people testing at once is how a user learns how the link shares between streamers, so the server only counts in-flight tests (a shared_ctx Value created pre-fork so every worker sees the same number) and the UI reports how many others ran alongside. Both Caddyfiles route /api/speedtest/* unbuffered, as the SSE chat route already is, so throughput is measured live rather than in bursts. Frontend: * speedtest.js holds the logic with no React in it (bucketed throughput, steady-state average that drops the first second, ping stats, stream-capacity tiers, hotspot address check) so Jest drives it with fake fetch and streams. * SpeedTestCalculator runs 20 pings, a 10 s download, and a 10 s upload with a live figure and rolling trace, then shows Mbps and MB/s, ping verdict, the client address with a hotspot badge, and a table of how many 480p..4K streams the download speed supports. Upload is sequential POSTs of one 4 MiB Blob because Safari cannot stream a request body. Nothing is saved. * Sparkline is a new inline-SVG ui component (no chart dependency), added to /theme-sample and checked in all four themes. A missing sample is a gap, not a plunge to zero. The page states that it measures the network path, not the drive that actually serves video files. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * speedtest: bound uploads in time, close the Start race, address review Review on #708 found three bugs and some polish: * Start could be clicked again while the first fetchInfo() was still pending, because the phase only left `idle` after that await. A second click made a second AbortController and a second concurrent run, and Cancel only reached the later one. start() now refuses when a controller already exists and enters a `starting` phase synchronously, so the button is Cancel before the first await. * The upload phase could overrun the advertised 10 s by however long the in-flight 4 MiB POST took: on a slow hotspot, the very link this tool exists for, that is tens of seconds. runUpload() now aborts the in-flight request at the phase deadline (counting only completed requests) and uses 1 MiB bodies so a few-Mbps link still completes several inside the phase. * The server upload sink was capped by size only, so a slow or paused body could hold a worker until 8 MiB eventually arrived. It now also enforces MAX_UPLOAD_SECONDS (15 s, matching download) and answers 408 when exceeded. Both caps together are what "cannot hold a worker" actually requires. Also: a NaN `seconds` now gets a NaN message instead of "must not be negative"; the module, Sparkline, and gallery docstrings are trimmed to purpose; and the upload counter is covered for the mid-stream 413, the 408, and a broken body. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|---|---|---|
| .. | ||
| cypress | ||
| public | ||
| scripts | ||
| src | ||
| .gitignore | ||
| cypress.config.js | ||
| package-lock.json | ||
| package.json | ||
| README.md | ||
| serve.json | ||
| tsconfig.json | ||
Getting Started with Create React App
This project was bootstrapped with Create React App.
Available Scripts
In the project directory, you can run:
npm start
Runs the app in the development mode.
Open http://localhost:3000 to view it in your browser.
The page will reload when you make changes.
You may also see any lint errors in the console.
npm test
Launches the test runner in the interactive watch mode.
See the section about running tests for more
information.
npm run build
Builds the app for production to the build folder.
It correctly bundles React in production mode and optimizes the build for the best performance.
The build is minified and the filenames include the hashes.
Your app is ready to be deployed!
See the section about deployment for more information.
npm run eject
Note: this is a one-way operation. Once you eject, you can't go back!
If you aren't satisfied with the build tool and configuration choices, you can eject at any time. This command will
remove the single build dependency from your project.
Instead, it will copy all the configuration files and the transitive dependencies (webpack, Babel, ESLint, etc) right
into your project so you have full control over them. All of the commands except eject will still work, but they will
point to the copied scripts so you can tweak them. At this point you're on your own.
You don't have to ever use eject. The curated feature set is suitable for small and middle deployments, and you
shouldn't feel obligated to use this feature. However we understand that this tool wouldn't be useful if you couldn't
customize it when you are ready for it.
Learn More
You can learn more in the Create React App documentation.
To learn React, check out the React documentation.
Code Splitting
This section has moved here: https://facebook.github.io/create-react-app/docs/code-splitting
Analyzing the Bundle Size
This section has moved here: https://facebook.github.io/create-react-app/docs/analyzing-the-bundle-size
Making a Progressive Web App
This section has moved here: https://facebook.github.io/create-react-app/docs/making-a-progressive-web-app
Advanced Configuration
This section has moved here: https://facebook.github.io/create-react-app/docs/advanced-configuration
Deployment
This section has moved here: https://facebook.github.io/create-react-app/docs/deployment
npm run build fails to minify
This section has moved here: https://facebook.github.io/create-react-app/docs/troubleshooting#npm-run-build-fails-to-minify