mirror of
https://github.com/lrnselfreliance/wrolpi.git
synced 2026-10-26 19:01:39 -04:00
* Add a Solar calculator with offline NASA POWER data Estimates a solar array's typical-year production from a location and the panels; everything else has defaults under an optional "Fine-tune" section. The model works from 12 monthly averages: Klein's average day per month, the Erbs monthly diffuse fraction, Collares-Pereira & Rabl / Liu & Jordan hourly split, HDKR transposition for fixed, single-axis and dual-axis arrays, then PVWatts' ASHRAE incidence loss, SAPM cell temperature, DC power, system losses and optional inverter. "Best for the year" and "Best for winter" sweep the tilt. Sunlight, diffuse, albedo and temperature come from NASA POWER's 2001-2020 climatology on a 1 degree grid, packed into app/public/data (3.1 MB, ~1 MB gzipped) by scripts/build_solar_climatology.py and fetched only when the calculator opens. Users can replace it with their own monthly values. Every setting lives in the URL, with defaults left out, so the Share button shares the whole configuration. Against PVWatts v8 for a 1 kW fixed array: Phoenix +0.6%, Seattle +8.8%, Anchorage +8.0% annually; these are recorded as tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Open the Solar calculator from the map, pins and current location The map's right-click (or long-press) menu gains "Calculate Solar Performance", and each saved pin a sun button; both open the calculator at that location. A button beside Latitude fills in the browser's current location. Locations are rounded to 4 decimals, and longitudes from a map panned around the world are wrapped back to -180..180. The map removed lat/lon/z from the URL when it closed, even after navigating to another page, which stripped the calculator's location from its URL (and from links shared with the Share button). It now only cleans up while the URL is still a map page. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add off-grid sizing to the Solar calculator A new "Off-grid sizing" tab sizes a battery system for the darkest month from a list of devices (watts x hours per day): - Battery bank for a number of days without sun, for LiFePO4 or lead-acid, at 12, 24 or 48 V. Outdoor lead-acid is enlarged for the cold; outdoor lithium warns against charging below 0 C. - Panels needed, from the worst month's DC production per kW at the chosen angle, with a button to apply the count. A PWM controller's loss (battery voltage over the panel's Vmp) raises the count. - Charge controller current, and the string voltage on the coldest morning against the controller's limit, since cold panels exceed their rated Voc. The coldest morning defaults to 25 C below the coldest monthly average. All inputs live in the URL like the rest of the calculator. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Bump wrolpi-help for the Solar calculator help page Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Credit NASA POWER as it asks, and say how the data was changed - The calculator gains a "Data attribution" link under the location with NASA POWER's requested acknowledgment, the data reference (Climatology API v2.10.0, downloaded 2026/10/04), the CC BY 4.0 license, and how WROLPi modified the data (rounded to one byte per value, temperature averaged into 1 degree cells, interpolated between cells), which CC BY 4.0 requires. - The build script writes the same text to solar-climatology.LICENSE.txt beside the data, with the API version taken from NASA's responses and the date the tiles were downloaded. A test keeps the page and file in step. - Bumps wrolpi-help for the updated attribution in the help page. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Solar: fix PWM sizing, Voc sign, unit switching and loading on review - PWM usable power now uses the string's voltage (Vmp x panels in series), delivers nothing when the charging voltage is at or above the string's Voc, and falls off between Vmp and Voc. The "too little voltage" warning covers PWM as well as MPPT. Previously two panels in series counted double, and a panel that could not charge a 48 V bank counted as fully usable. - A Voc temperature coefficient entered without its minus sign is treated as negative, in the math, the URL and the input, so the cold-morning check cannot be made too generous. - Switching Fahrenheit on or off converts the entered temperatures instead of reinterpreting them. - While the sunlight data downloads, the off-grid tab shows a loader rather than asking for a location, and holds the cold-morning verdict until the site's temperatures are known or one has been entered. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Solar: move the data attribution to the bottom of the page The full NASA POWER acknowledgment, license and changes now sit in a small "Data attribution" section at the end of the calculator, always visible, instead of behind a link under the location. The source line under the location points to it. Bumps wrolpi-help to match. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Solar: drop the data source line under the location The attribution at the bottom of the page is enough. The line under the location now only appears to report the data's state: loading, failed to load, or replaced by the user's own values. Bumps wrolpi-help for the refreshed screenshot. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
158 lines
6.2 KiB
JavaScript
158 lines
6.2 KiB
JavaScript
import React from 'react';
|
|
import {act, fireEvent, screen} from '@testing-library/react';
|
|
import {Route, Routes} from 'react-router';
|
|
import {renderWithProviders as render} from '../test-utils';
|
|
import {MapRoute} from './Map';
|
|
|
|
// What the map's Pins and Manage tabs show while their lists are still loading, when the
|
|
// fetch failed, and when the server confirmed the list is empty. The empty messages invite
|
|
// the user to act ("Right-click on the map to add one"), so they may only appear for a
|
|
// confirmed empty list.
|
|
|
|
jest.mock('maplibre-gl', () => ({
|
|
__esModule: true,
|
|
default: {Map: class {
|
|
}, addProtocol: jest.fn(), Marker: class {
|
|
}},
|
|
}));
|
|
jest.mock('pmtiles', () => ({
|
|
__esModule: true, Protocol: class {
|
|
tile = jest.fn();
|
|
},
|
|
}));
|
|
jest.mock('protomaps-themes-base', () => ({__esModule: true, default: () => []}));
|
|
jest.mock('./MapViewer', () => ({__esModule: true, default: () => null}));
|
|
|
|
jest.mock('../api', () => ({
|
|
...jest.requireActual('../api'),
|
|
getMapFiles: jest.fn(),
|
|
fetchMapSubscriptions: jest.fn(),
|
|
getMapPins: jest.fn(),
|
|
}));
|
|
|
|
const api = require('../api');
|
|
|
|
const pending = () => new Promise(() => {
|
|
});
|
|
const NO_PINS = /No pins\. Right-click/;
|
|
const NO_RESULTS = /^No results$/;
|
|
|
|
// The pins page renders one table per breakpoint through `Media`, so the real media provider is
|
|
// needed; the queries below tolerate either variant being in the tree.
|
|
const renderAt = (route) => render(
|
|
<Routes><Route path='/map/*' element={<MapRoute/>}/></Routes>,
|
|
{route, withMedia: true},
|
|
);
|
|
|
|
beforeEach(() => {
|
|
jest.clearAllMocks();
|
|
// The media provider reads matchMedia; the global stub's implementation is reset between
|
|
// tests, so give it one here. Only the computer breakpoint (1024px) matches, so the
|
|
// provider reports a desktop viewport and the pins page renders its desktop table.
|
|
window.matchMedia = jest.fn().mockImplementation(query => ({
|
|
matches: query.includes('1024'), media: query, onchange: null,
|
|
addListener: jest.fn(), removeListener: jest.fn(),
|
|
addEventListener: jest.fn(), removeEventListener: jest.fn(), dispatchEvent: jest.fn(),
|
|
}));
|
|
api.getMapFiles.mockResolvedValue({files: []});
|
|
api.fetchMapSubscriptions.mockResolvedValue({catalog: [], subscriptions: []});
|
|
api.getMapPins.mockResolvedValue({pins: []});
|
|
});
|
|
|
|
describe('the Pins tab', () => {
|
|
test('pending: shows a placeholder, not "No pins"', () => {
|
|
api.getMapPins.mockReturnValue(pending());
|
|
const {container} = renderAt('/map/pins');
|
|
expect(container.querySelector('.wrolpi-placeholder')).toBeInTheDocument();
|
|
expect(screen.queryAllByText(NO_PINS)).toHaveLength(0);
|
|
});
|
|
|
|
test('failed: shows an error, not "No pins"', async () => {
|
|
// The api helper returns undefined on a non-OK response.
|
|
api.getMapPins.mockResolvedValue(undefined);
|
|
renderAt('/map/pins');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getByText(/Could not fetch map pins/)).toBeInTheDocument();
|
|
expect(screen.queryAllByText(NO_PINS)).toHaveLength(0);
|
|
});
|
|
|
|
test('empty: shows "No pins"', async () => {
|
|
renderAt('/map/pins');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getAllByText(NO_PINS).length).toBeGreaterThan(0);
|
|
});
|
|
|
|
test('loaded: lists the pins', async () => {
|
|
api.getMapPins.mockResolvedValue({pins: [{id: 1, lat: 40.1, lon: -111.2, label: 'Camp', color: '#f00'}]});
|
|
renderAt('/map/pins');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getAllByText('Camp').length).toBeGreaterThan(0);
|
|
expect(screen.queryAllByText(NO_PINS)).toHaveLength(0);
|
|
});
|
|
|
|
test('a pin opens the Solar calculator at its location', async () => {
|
|
api.getMapPins.mockResolvedValue({pins: [{id: 1, lat: 40.12346, lon: -111.2, label: 'Camp', color: '#f00'}]});
|
|
renderAt('/map/pins');
|
|
await act(async () => {
|
|
});
|
|
fireEvent.click(screen.getAllByRole('button', {name: 'Solar estimate for Camp'})[0]);
|
|
expect(window.location.pathname).toBe('/more/calculators');
|
|
expect(window.location.search).toBe('?calc=solar&lat=40.1235&lon=-111.2');
|
|
});
|
|
});
|
|
|
|
describe('the Manage tab subscriptions table', () => {
|
|
test('pending: shows a placeholder, not "No results"', async () => {
|
|
api.fetchMapSubscriptions.mockReturnValue(pending());
|
|
const {container} = renderAt('/map/manage');
|
|
await act(async () => {
|
|
});
|
|
// The files table has loaded (empty); the subscriptions table is still pending.
|
|
expect(container.querySelector('.wrolpi-placeholder')).toBeInTheDocument();
|
|
expect(screen.queryByText(NO_RESULTS)).not.toBeInTheDocument();
|
|
});
|
|
|
|
test('failed: shows an error, not "No results"', async () => {
|
|
api.fetchMapSubscriptions.mockResolvedValue(undefined);
|
|
renderAt('/map/manage');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getByText(/Could not fetch map subscriptions/)).toBeInTheDocument();
|
|
expect(screen.queryByText(NO_RESULTS)).not.toBeInTheDocument();
|
|
});
|
|
|
|
test('empty: shows "No results"', async () => {
|
|
renderAt('/map/manage');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getByText(NO_RESULTS)).toBeInTheDocument();
|
|
});
|
|
|
|
// The "View All Regions" preview draws the catalog; a pending or failed catalog must not be
|
|
// previewed as zero regions.
|
|
test('pending: the regions preview is disabled', async () => {
|
|
api.fetchMapSubscriptions.mockReturnValue(pending());
|
|
renderAt('/map/manage');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getByRole('button', {name: 'View All Regions'})).toBeDisabled();
|
|
});
|
|
|
|
test('failed: the regions preview is disabled', async () => {
|
|
api.fetchMapSubscriptions.mockResolvedValue(undefined);
|
|
renderAt('/map/manage');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getByRole('button', {name: 'View All Regions'})).toBeDisabled();
|
|
});
|
|
|
|
test('loaded: the regions preview is enabled', async () => {
|
|
renderAt('/map/manage');
|
|
await act(async () => {
|
|
});
|
|
expect(screen.getByRole('button', {name: 'View All Regions'})).toBeEnabled();
|
|
});
|
|
});
|