wrolpi/app/src/components/MapViewer.js
lrnselfreliance cc8afa5370
Add a Solar calculator (#778)
* Add a Solar calculator with offline NASA POWER data

Estimates a solar array's typical-year production from a location and the
panels; everything else has defaults under an optional "Fine-tune" section.

The model works from 12 monthly averages: Klein's average day per month, the
Erbs monthly diffuse fraction, Collares-Pereira & Rabl / Liu & Jordan hourly
split, HDKR transposition for fixed, single-axis and dual-axis arrays, then
PVWatts' ASHRAE incidence loss, SAPM cell temperature, DC power, system
losses and optional inverter.  "Best for the year" and "Best for winter" sweep
the tilt.

Sunlight, diffuse, albedo and temperature come from NASA POWER's 2001-2020
climatology on a 1 degree grid, packed into app/public/data (3.1 MB, ~1 MB
gzipped) by scripts/build_solar_climatology.py and fetched only when the
calculator opens.  Users can replace it with their own monthly values.

Every setting lives in the URL, with defaults left out, so the Share button
shares the whole configuration.

Against PVWatts v8 for a 1 kW fixed array: Phoenix +0.6%, Seattle +8.8%,
Anchorage +8.0% annually; these are recorded as tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Open the Solar calculator from the map, pins and current location

The map's right-click (or long-press) menu gains "Calculate Solar
Performance", and each saved pin a sun button; both open the calculator at
that location.  A button beside Latitude fills in the browser's current
location.  Locations are rounded to 4 decimals, and longitudes from a map
panned around the world are wrapped back to -180..180.

The map removed lat/lon/z from the URL when it closed, even after navigating
to another page, which stripped the calculator's location from its URL (and
from links shared with the Share button).  It now only cleans up while the
URL is still a map page.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add off-grid sizing to the Solar calculator

A new "Off-grid sizing" tab sizes a battery system for the darkest month
from a list of devices (watts x hours per day):

- Battery bank for a number of days without sun, for LiFePO4 or lead-acid,
  at 12, 24 or 48 V.  Outdoor lead-acid is enlarged for the cold; outdoor
  lithium warns against charging below 0 C.
- Panels needed, from the worst month's DC production per kW at the chosen
  angle, with a button to apply the count.  A PWM controller's loss (battery
  voltage over the panel's Vmp) raises the count.
- Charge controller current, and the string voltage on the coldest morning
  against the controller's limit, since cold panels exceed their rated Voc.
  The coldest morning defaults to 25 C below the coldest monthly average.

All inputs live in the URL like the rest of the calculator.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bump wrolpi-help for the Solar calculator help page

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Credit NASA POWER as it asks, and say how the data was changed

- The calculator gains a "Data attribution" link under the location with
  NASA POWER's requested acknowledgment, the data reference (Climatology API
  v2.10.0, downloaded 2026/10/04), the CC BY 4.0 license, and how WROLPi
  modified the data (rounded to one byte per value, temperature averaged
  into 1 degree cells, interpolated between cells), which CC BY 4.0 requires.
- The build script writes the same text to solar-climatology.LICENSE.txt
  beside the data, with the API version taken from NASA's responses and the
  date the tiles were downloaded.  A test keeps the page and file in step.
- Bumps wrolpi-help for the updated attribution in the help page.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Solar: fix PWM sizing, Voc sign, unit switching and loading on review

- PWM usable power now uses the string's voltage (Vmp x panels in series),
  delivers nothing when the charging voltage is at or above the string's Voc,
  and falls off between Vmp and Voc.  The "too little voltage" warning covers
  PWM as well as MPPT.  Previously two panels in series counted double, and a
  panel that could not charge a 48 V bank counted as fully usable.
- A Voc temperature coefficient entered without its minus sign is treated as
  negative, in the math, the URL and the input, so the cold-morning check
  cannot be made too generous.
- Switching Fahrenheit on or off converts the entered temperatures instead
  of reinterpreting them.
- While the sunlight data downloads, the off-grid tab shows a loader rather
  than asking for a location, and holds the cold-morning verdict until the
  site's temperatures are known or one has been entered.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Solar: move the data attribution to the bottom of the page

The full NASA POWER acknowledgment, license and changes now sit in a small
"Data attribution" section at the end of the calculator, always visible,
instead of behind a link under the location.  The source line under the
location points to it.  Bumps wrolpi-help to match.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Solar: drop the data source line under the location

The attribution at the bottom of the page is enough.  The line under the
location now only appears to report the data's state: loading, failed to
load, or replaced by the user's own values.  Bumps wrolpi-help for the
refreshed screenshot.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-04 18:36:45 -06:00

1038 lines
43 KiB
JavaScript

import React, {useCallback, useContext, useEffect, useRef, useState} from "react";
import {useNavigate, useSearchParams} from "react-router";
import maplibregl from "maplibre-gl";
import "maplibre-gl/dist/maplibre-gl.css";
import {Protocol} from "pmtiles";
import layers from "protomaps-themes-base";
import mlcontour from "@acalcutt/maplibre-contour-pmtiles";
import {addMapPin, deleteMapPin, getMapFiles, getMapPins, searchMap, setMapDefaultLocation} from "../api";
import {MAP_VIEWER_URI} from "./Vars";
import {Button, Checkbox, Header, Icon, Panel, TextInput, Toggle} from "./ui";
import {SettingsContext, ThemeContext} from "../contexts/contexts";
import {mapFlavor, mapSprite} from "../themes/names";
import {poiPopupHtml} from "./mapPoiPopup";
import {solarCalculatorPath} from "./calculators/solar";
// Terrain DEM file prefix for hillshade and contours.
const TERRAIN_PREFIX = "terrain-";
// Detect full planet files: "planet-20260329.pmtiles" or bare date like "20260329.pmtiles".
function isPlanetFile(name) {
if (name.startsWith("planet-")) return true;
return /^\d{8}\.pmtiles$/.test(name);
}
// Layer groups matching the standalone viewer.
const LAYER_GROUPS = {
"Hillshade": ["hillshade"],
"Contours": ["contour-lines", "contour-labels"],
"Water": ["water"],
"Land Cover": [
"landcover", "landuse_park", "landuse_urban_green", "landuse_beach",
"landuse_aerodrome", "landuse_hospital", "landuse_industrial",
"landuse_pedestrian", "landuse_pier", "landuse_school", "landuse_zoo",
],
"Buildings": ["buildings"],
"Roads - Highway": ["roads_highway"],
"Roads - Major": ["roads_major", "roads_link"],
"Roads - Minor": ["roads_minor", "roads_other"],
"Roads - Tunnels": ["roads_tunnels"],
"Roads - Bridges": ["roads_bridges"],
"Rail & Runways": ["roads_rail", "roads_runway", "roads_taxiway", "landuse_runway"],
"Boundaries": ["boundaries"],
"Labels": ["roads_labels", "places_", "address_label", "pois", "water_label", "water_waterway_label"],
};
// Register PMTiles protocol once.
const protocol = new Protocol();
maplibregl.addProtocol("pmtiles", protocol.tile);
// Planet overview blob — provides global basemap at zoom 0-6.
const MAP_OVERVIEW_URL = "/blobs/map-overview.pmtiles";
// Layers to skip from non-primary sources (they would paint over the primary source's content).
const SKIP_SECONDARY = new Set(["background", "earth"]);
// Set up contour DEM source (must be called once before buildStyle).
let demSource = null;
let terrainUrl = null;
function initContourSource(filename) {
terrainUrl = `/media/map/${filename}`;
if (demSource) return;
demSource = new mlcontour.DemSource({
url: `pmtiles://${window.location.origin}${terrainUrl}`,
encoding: "terrarium",
maxzoom: 8,
worker: true,
});
demSource.setupMaplibre(maplibregl);
}
// sources: [{name, url}] where name is used as the MapLibre source ID and url is the pmtiles:// URL.
// hasTerrain: whether to include hillshade and contour layers.
// scaleUnit: "metric" or "imperial" — affects contour intervals and labels.
// `sprite` is deliberately separate from `flavor`: we ship two sprite sets (light, dark)
// and the monochrome themes draw a `black` basemap, which has no sprites of its own.
function buildStyle(sources, flavor = "light", hasTerrain = false, scaleUnit = "metric",
sprite = "light") {
const styleSources = {};
const allLayers = [];
for (let i = 0; i < sources.length; i++) {
const {name, url} = sources[i];
styleSources[name] = {type: "vector", url};
const fileLayers = layers(name, flavor);
if (i === 0) {
// Primary source: use layer IDs as-is.
allLayers.push(...fileLayers);
} else {
// Additional sources: prefix layer IDs and skip background/earth.
for (const layer of fileLayers) {
if (SKIP_SECONDARY.has(layer.id)) continue;
allLayers.push({...layer, id: `${name}:${layer.id}`});
}
}
}
// Add terrain sources and layers if available.
if (hasTerrain && demSource) {
// Read saved visibility to set initial layer state correctly.
const savedVis = getInitialVisibility();
const hillshadeVis = savedVis["Hillshade"] ? "visible" : "none";
const contourVis = savedVis["Contours"] ? "visible" : "none";
// Hillshade from raster-dem source.
styleSources["terrain-dem"] = {
type: "raster-dem",
url: `pmtiles://${terrainUrl}`,
encoding: "terrarium",
tileSize: 512,
};
// Insert hillshade early (after earth/landcover, before roads).
const hillshadeSearch = allLayers.findIndex(l => l.id === "buildings");
const hillshadeIdx = hillshadeSearch === -1 ? allLayers.length : hillshadeSearch;
allLayers.splice(hillshadeIdx, 0, {
id: "hillshade",
type: "hillshade",
source: "terrain-dem",
layout: {visibility: hillshadeVis},
paint: {
"hillshade-shadow-color": "#000000",
"hillshade-illumination-anchor": "viewport",
"hillshade-exaggeration": 0.3,
},
});
// Contour lines from on-the-fly generation.
const isImperial = scaleUnit === "imperial";
const contourUrl = demSource.contourProtocolUrl({
overzoom: 1,
contourLayer: "contours",
elevationKey: "ele",
levelKey: "level",
multiplier: isImperial ? 3.28084 : 1, // meters to feet conversion
thresholds: isImperial ? {
// [minor, major] contour intervals in feet per zoom level.
4: [1000, 5000],
5: [500, 2500],
6: [200, 1000],
7: [200, 1000],
8: [100, 500],
} : {
// [minor, major] contour intervals in meters per zoom level.
4: [500, 2500],
5: [200, 1000],
6: [100, 500],
7: [100, 500],
8: [50, 200],
},
});
const elevUnit = isImperial ? "ft" : "m";
styleSources["contours"] = {
type: "vector",
tiles: [contourUrl],
maxzoom: 8,
};
allLayers.push(
{
id: "contour-lines",
type: "line",
source: "contours",
"source-layer": "contours",
filter: ["!=", ["get", "level"], 1],
layout: {visibility: contourVis},
paint: {"line-color": "rgba(150,100,50,0.3)", "line-width": 0.5},
},
{
id: "contour-lines-major",
type: "line",
source: "contours",
"source-layer": "contours",
filter: ["==", ["get", "level"], 1],
layout: {visibility: contourVis},
paint: {"line-color": "rgba(150,100,50,0.5)", "line-width": 1},
},
{
id: "contour-labels",
type: "symbol",
source: "contours",
"source-layer": "contours",
filter: ["==", ["get", "level"], 1],
layout: {
visibility: contourVis,
"symbol-placement": "line",
"text-field": ["concat", ["get", "ele"], elevUnit],
"text-size": 10,
},
paint: {
"text-color": flavor === "light" ? "rgba(150,100,50,0.8)" : "rgba(210,180,140,0.9)",
"text-halo-color": flavor === "light" ? "rgba(255,255,255,0.8)" : "rgba(0,0,0,0.8)",
"text-halo-width": 1,
},
},
);
}
return {
version: 8,
glyphs: "/map-assets/fonts/{fontstack}/{range}.pbf",
sprite: `${window.location.origin}/map-assets/sprites/${sprite}`,
sources: styleSources,
layers: allLayers,
};
}
// Groups that start hidden by default (used when no saved state exists).
const DEFAULT_HIDDEN = new Set(["Hillshade", "Contours"]);
const STORAGE_KEY_LAYERS = "wrolpi-map-layers";
const STORAGE_KEY_SCALE = "wrolpi-map-scale";
function getInitialVisibility() {
try {
const saved = localStorage.getItem(STORAGE_KEY_LAYERS);
if (saved) return JSON.parse(saved);
} catch (e) { /* ignore */ }
const v = {};
for (const g of Object.keys(LAYER_GROUPS)) v[g] = !DEFAULT_HIDDEN.has(g);
return v;
}
function LayerControl({map, scaleUnit, onScaleUnitChange, visibilityRef}) {
const [visibility, setVisibility] = useState(() => {
const v = getInitialVisibility();
if (visibilityRef) visibilityRef.current = v;
return v;
});
const [collapsed, setCollapsed] = useState(true);
const [isMobile, setIsMobile] = useState(
() => typeof window !== "undefined" && window.matchMedia("(max-width: 768px)").matches
);
useEffect(() => {
if (typeof window === "undefined") return;
const mq = window.matchMedia("(max-width: 768px)");
const handler = (e) => setIsMobile(e.matches);
mq.addEventListener ? mq.addEventListener("change", handler) : mq.addListener(handler);
return () => {
mq.removeEventListener ? mq.removeEventListener("change", handler) : mq.removeListener(handler);
};
}, []);
const iconOnly = isMobile && collapsed;
const toggleGroup = useCallback((groupName, checked) => {
if (!map) return;
const prefixes = LAYER_GROUPS[groupName];
const allMapLayers = map.getStyle()?.layers || [];
for (const layer of allMapLayers) {
// Match both plain IDs and prefixed IDs (e.g., "water" and "file.pmtiles:water").
const baseId = layer.id.includes(":") ? layer.id.split(":").slice(1).join(":") : layer.id;
if (prefixes.some(p => baseId.includes(p))) {
map.setLayoutProperty(layer.id, "visibility", checked ? "visible" : "none");
}
}
setVisibility(prev => {
const next = {...prev, [groupName]: checked};
if (visibilityRef) visibilityRef.current = next;
try { localStorage.setItem(STORAGE_KEY_LAYERS, JSON.stringify(next)); } catch (e) { /* ignore */ }
return next;
});
}, [map, visibilityRef]);
// A floating control drawn over the map canvas: it is part of the app's interface,
// not map data, so it is never filtered — it stays plain, token-colored chrome in
// every theme, same as the nav bar.
const panelStyle = {
position: "absolute",
top: "0.625rem",
left: "0.625rem",
zIndex: 1000,
background: "var(--panel)",
border: "1px solid var(--border)",
color: "var(--text)",
maxHeight: "calc(100vh - 7.5rem)",
overflowY: "auto",
minWidth: iconOnly ? 0 : "12.5rem",
fontSize: '0.8125rem',
};
const headerStyle = iconOnly
? {
padding: 0, cursor: "pointer", userSelect: "none",
display: "flex", alignItems: "center", justifyContent: "center",
width: "2.5rem", height: "2.5rem",
}
: {
padding: "0.5rem 0.75rem", cursor: "pointer", fontWeight: 600,
display: "flex", justifyContent: "space-between", alignItems: "center",
borderBottom: collapsed ? "none" : "1px solid var(--border)", userSelect: "none",
};
return <div style={panelStyle}>
<div
style={headerStyle}
onClick={() => setCollapsed(c => !c)}
title="Layers"
aria-label="Layers"
>
{iconOnly
? <Icon name="map outline" size="large" style={{margin: 0}}/>
: <>
<span>Layers</span>
<Icon name={collapsed ? "chevron right" : "chevron down"} size="small"/>
</>}
</div>
{!collapsed && <div style={{padding: "0.25rem 0.75rem 0.5rem"}}>
{Object.keys(LAYER_GROUPS).map(name =>
<div key={name} style={{padding: "0.125rem 0"}}>
<Checkbox
label={name}
checked={visibility[name]}
onChange={(e) => toggleGroup(name, e.currentTarget.checked)}
/>
</div>
)}
<div style={{borderTop: "1px solid var(--border)", marginTop: "0.375rem", paddingTop: "0.375rem"}}>
<Toggle
label={scaleUnit === "imperial" ? "Imperial" : "Metric"}
checked={scaleUnit === "imperial"}
onChange={(e) => onScaleUnitChange(e.currentTarget.checked ? "imperial" : "metric")}
/>
</div>
</div>}
</div>;
}
const PIN_COLORS = ["red", "blue", "green", "yellow", "orange", "purple"];
function AddPinDialog({lat, lon, onSubmit, onCancel}) {
const [label, setLabel] = useState("");
const [color, setColor] = useState("red");
// A floating dialog over the canvas — page chrome, not map data, so it is never
// filtered and keeps flat, bordered surfaces like the rest of the app (no shadow).
return <div style={{
position: "absolute", top: "50%", left: "50%", transform: "translate(-50%, -50%)",
zIndex: 1002, background: "var(--panel)", border: "1px solid var(--border)", color: "var(--text)",
padding: "1rem", minWidth: "15.625rem",
}}>
<div style={{fontWeight: 600, marginBottom: "0.5rem"}}>Add Pin</div>
<div style={{fontSize: '0.75rem', color: "var(--muted)", marginBottom: "0.5rem"}}>{lat.toFixed(4)}, {lon.toFixed(4)}</div>
<TextInput
placeholder="Label"
value={label}
onChange={e => setLabel(e.target.value)}
autoFocus
onKeyDown={e => e.key === "Enter" && label.trim() && onSubmit(label.trim(), color)}
style={{marginBottom: "0.5rem"}}
/>
<div style={{display: "flex", gap: "0.375rem", marginBottom: "0.75rem"}}>
{PIN_COLORS.map(c =>
<div
key={c}
onClick={() => setColor(c)}
style={{
width: "1.5rem", height: "1.5rem", borderRadius: "50%", background: c, cursor: "pointer",
border: color === c ? "3px solid var(--text)" : "2px solid var(--border)",
}}
/>
)}
</div>
<div style={{display: "flex", gap: "0.5rem", justifyContent: "flex-end"}}>
<Button role='cancel' size='sm' onClick={onCancel}>Cancel</Button>
<Button
role='primary'
size='sm'
onClick={() => label.trim() && onSubmit(label.trim(), color)}
disabled={!label.trim()}
>
Add
</Button>
</div>
</div>;
}
// Coordinate regex: "45.5, -122.6" or "45.5 -122.6"
const COORD_REGEX = /^\s*(-?\d+\.?\d*)\s*[,\s]\s*(-?\d+\.?\d*)\s*$/;
function MapSearch({map}) {
const [query, setQuery] = useState("");
const [results, setResults] = useState([]);
const [showResults, setShowResults] = useState(false);
const [searchMarker, setSearchMarker] = useState(null);
const debounceRef = useRef(null);
const containerRef = useRef(null);
// Close results when clicking outside.
useEffect(() => {
const handler = (e) => {
if (containerRef.current && !containerRef.current.contains(e.target)) {
setShowResults(false);
}
};
document.addEventListener("click", handler);
return () => document.removeEventListener("click", handler);
}, []);
const doSearch = useCallback((q) => {
if (!q || q.length < 2) {
setResults([]);
setShowResults(false);
return;
}
// Check for coordinate input first.
const coordMatch = q.match(COORD_REGEX);
if (coordMatch) {
const lat = parseFloat(coordMatch[1]);
const lon = parseFloat(coordMatch[2]);
if (lat >= -90 && lat <= 90 && lon >= -180 && lon <= 180) {
setResults([{name: `${lat}, ${lon}`, kind: "coordinates", lat, lon, min_zoom: 0, source: "input"}]);
setShowResults(true);
return;
}
}
// Get current map center for proximity bias.
let lat = null, lon = null;
if (map) {
const center = map.getCenter();
lat = center.lat;
lon = center.lng;
}
// A failed search (undefined) shows no dropdown, same as finding nothing: this is an
// as-you-type suggestion list, not a results page.
searchMap(q, 8, 0, lat, lon).then(data => {
const found = data?.results || [];
setResults(found);
setShowResults(found.length > 0);
}).catch(e => console.error(e));
}, [map]);
const handleInput = useCallback((e) => {
const q = e.target.value;
setQuery(q);
clearTimeout(debounceRef.current);
debounceRef.current = setTimeout(() => doSearch(q), 300);
}, [doSearch]);
const handleSelect = useCallback((result) => {
if (!map) return;
// Remove old search marker.
if (searchMarker) {
searchMarker.remove();
}
const zoom = result.kind === "coordinates" ? 14 : Math.max(map.getZoom(), 12);
map.flyTo({center: [result.lon, result.lat], zoom});
const marker = new maplibregl.Marker({color: "#6435c9"})
.setLngLat([result.lon, result.lat])
.setPopup(new maplibregl.Popup({offset: 25}).setText(result.name))
.addTo(map);
marker.togglePopup();
setSearchMarker(marker);
setShowResults(false);
setQuery(result.name);
}, [map, searchMarker]);
const handleKeyDown = useCallback((e) => {
if (e.key === "Escape") {
setShowResults(false);
e.target.blur();
}
}, []);
const formatPopulation = (pop) => {
if (!pop) return "";
if (pop >= 1_000_000) return `${(pop / 1_000_000).toFixed(1)}M`;
if (pop >= 1_000) return `${(pop / 1_000).toFixed(0)}K`;
return `${pop}`;
};
const resultSubtext = (r) => {
if (r.kind === "coordinates") return "";
const parts = [];
if (r.region) parts.push(r.region);
const detail = r.kind_detail || r.kind || "";
if (detail && !r.region) parts.push(detail.replace(/_/g, " "));
const pop = formatPopulation(r.population);
if (pop) parts.push(`pop. ${pop}`);
return parts.join(" \u00b7 ");
};
// Floating search chrome over the canvas — page interface, not map data, so it is
// never filtered. Flat surfaces: bordered, no box-shadow, token colors only.
return <div ref={containerRef} style={{
position: "absolute", top: "0.625rem", left: "50%", transform: "translateX(-50%)",
zIndex: 5, width: "20rem", maxWidth: "calc(100% - 100px)",
}}>
<input
type="text"
placeholder="Search places..."
value={query}
onChange={handleInput}
onFocus={() => results.length > 0 && setShowResults(true)}
onKeyDown={handleKeyDown}
style={{
width: "100%", padding: "0.5rem 0.75rem", border: "1px solid var(--border)",
fontSize: '0.875rem', background: "var(--panel)", color: "var(--text)",
}}
/>
{showResults && results.length > 0 && <div style={{
background: "var(--panel)", border: "1px solid var(--border)", borderTop: "none",
maxHeight: "18.75rem", overflowY: "auto",
}}>
{results.map((r, i) => <div
key={i}
onClick={() => handleSelect(r)}
onMouseEnter={e => e.currentTarget.style.background = "var(--head)"}
onMouseLeave={e => e.currentTarget.style.background = "transparent"}
style={{padding: "0.5rem 0.75rem", cursor: "pointer", borderBottom: "1px solid var(--border)"}}
>
<div style={{fontWeight: 500}}>{r.name}</div>
{resultSubtext(r) && <div style={{fontSize: '0.6875rem', color: "var(--muted)"}}>{resultSubtext(r)}</div>}
</div>)}
</div>}
</div>;
}
export default function MapViewer() {
const mapContainer = useRef(null);
const mapRef = useRef(null);
const scaleControlRef = useRef(null);
const activeFilesRef = useRef([]);
const hasTerrainRef = useRef(false);
const layerVisibilityRef = useRef(null);
const [mapReady, setMapReady] = useState(false);
const [error, setError] = useState(null);
const [contextMenu, setContextMenu] = useState(null);
const navigate = useNavigate();
const [addingPin, setAddingPin] = useState(null); // {lat, lon} when pin dialog is open
const markersRef = useRef([]);
const pinsVisibleRef = useRef(true);
const [scaleUnit, setScaleUnit] = useState(() => {
try { return localStorage.getItem(STORAGE_KEY_SCALE) || "metric"; } catch (e) { return "metric"; }
});
const [searchParams, setSearchParams] = useSearchParams();
const {theme} = useContext(ThemeContext);
const {settings, fetchSettings} = useContext(SettingsContext);
// Use URL params if provided, otherwise fall back to saved default location, then 0,0,z2.
const hasUrlParams = searchParams.has("lat") || searchParams.has("lon") || searchParams.has("z");
const defaultLoc = settings?.map_default_location;
const initialLat = hasUrlParams
? (parseFloat(searchParams.get("lat")) || 0)
: (parseFloat(defaultLoc?.lat) || 0);
const initialLon = hasUrlParams
? (parseFloat(searchParams.get("lon")) || 0)
: (parseFloat(defaultLoc?.lon) || 0);
const initialZoom = hasUrlParams
? (parseFloat(searchParams.get("z")) || 2)
: (parseFloat(defaultLoc?.zoom) || 2);
useEffect(() => {
if (!mapContainer.current) return;
let map;
let destroyed = false;
const init = async () => {
const mapSources = [];
// Fetch user's PMTiles files first to determine what base layer is needed.
let hasTerrain = false;
let terrainFileName = null;
let planetFile = null;
try {
const data = await getMapFiles();
if (data?.files) {
const regionFiles = [];
for (const f of data.files) {
if (f.name.startsWith(TERRAIN_PREFIX) && f.name.endsWith('.pmtiles')) {
hasTerrain = true;
terrainFileName = f.name;
} else if (isPlanetFile(f.name)) {
if (!planetFile || f.size > planetFile.size) {
planetFile = f;
}
} else {
regionFiles.push(f);
}
}
if (planetFile) {
// Planet covers everything — sole vector source, no overview needed.
mapSources.push({name: planetFile.name, url: `pmtiles:///media/map/${planetFile.name}`});
} else {
// Use regional extracts.
for (const f of regionFiles) {
mapSources.push({name: f.name, url: `pmtiles:///media/map/${f.name}`});
}
// Add planet overview blob as low-zoom base layer (if available).
try {
const resp = await fetch(MAP_OVERVIEW_URL, {method: "HEAD"});
if (resp.ok) {
mapSources.unshift({name: "map-overview", url: `pmtiles://${MAP_OVERVIEW_URL}`});
}
} catch (e) {
console.debug("Planet overview not available:", e);
}
}
}
} catch (e) {
console.error("Failed to fetch map files:", e);
}
if (destroyed) return;
activeFilesRef.current = mapSources;
hasTerrainRef.current = hasTerrain;
// Initialize contour source if terrain data is available.
if (hasTerrain) {
initContourSource(terrainFileName);
}
try {
map = new maplibregl.Map({
container: mapContainer.current,
style: buildStyle(mapSources, mapFlavor(theme), hasTerrain, scaleUnit, mapSprite(theme)),
center: [initialLon, initialLat],
zoom: initialZoom,
attributionControl: true,
preserveDrawingBuffer: true,
});
map.addControl(new maplibregl.NavigationControl(), "top-right");
map.addControl(new maplibregl.FullscreenControl(), "top-right");
const sc = new maplibregl.ScaleControl({maxWidth: 200, unit: scaleUnit});
map.addControl(sc, "bottom-left");
scaleControlRef.current = sc;
map.addControl(new maplibregl.GeolocateControl({
positionOptions: {enableHighAccuracy: true},
trackUserLocation: true,
showUserHeading: true,
showAccuracyCircle: true,
}), "top-right");
// Pin toggle button.
const pinToggle = document.createElement("button");
pinToggle.type = "button";
pinToggle.title = "Toggle pins";
pinToggle.textContent = "📍";
pinToggle.style.cssText = "font-size:18px;width:29px;height:29px;border:none;cursor:pointer;background:white;border-radius:4px;display:flex;align-items:center;justify-content:center;";
pinToggle.addEventListener("click", () => {
pinsVisibleRef.current = !pinsVisibleRef.current;
const display = pinsVisibleRef.current ? "" : "none";
pinToggle.style.opacity = pinsVisibleRef.current ? "1" : "0.5";
for (const m of markersRef.current) {
m.getElement().style.display = display;
}
});
const pinControl = {
onAdd: () => {
const container = document.createElement("div");
container.className = "maplibregl-ctrl maplibregl-ctrl-group";
container.appendChild(pinToggle);
return container;
},
onRemove: () => {},
};
map.addControl(pinControl, "top-right");
// Right-click context menu (desktop).
map.on("contextmenu", (e) => {
if (destroyed) return;
setContextMenu({
x: e.point.x,
y: e.point.y,
lat: e.lngLat.lat,
lon: e.lngLat.lng,
});
});
map.on("click", () => setContextMenu(null));
map.on("movestart", () => setContextMenu(null));
// Click a POI to see the details the pmtiles file already has (kind, detail, elevation).
const poiLayerIds = () => (map.getStyle()?.layers || [])
.map(l => l.id)
.filter(id => id === "pois" || id.endsWith(":pois"))
.filter(id => map.getLayer(id));
map.on("click", (e) => {
if (destroyed) return;
const layers = poiLayerIds();
if (!layers.length) return;
const html = poiPopupHtml(map.queryRenderedFeatures(e.point, {layers}), e.lngLat);
if (!html) return;
new maplibregl.Popup({offset: 8, maxWidth: "260px", className: "wrolpi-map-popup"})
.setLngLat(e.lngLat)
.setHTML(html)
.addTo(map);
});
map.on("mousemove", (e) => {
if (destroyed) return;
const layers = poiLayerIds();
const hit = layers.length && map.queryRenderedFeatures(e.point, {layers}).length;
map.getCanvas().style.cursor = hit ? "pointer" : "";
});
// Long-press context menu (mobile).
let longPressTimer = null;
let touchStartPos = null;
const canvas = map.getCanvas();
canvas.addEventListener("touchstart", (e) => {
if (e.touches.length !== 1) return;
touchStartPos = {x: e.touches[0].clientX, y: e.touches[0].clientY};
longPressTimer = setTimeout(() => {
const rect = canvas.getBoundingClientRect();
const point = {x: touchStartPos.x - rect.left, y: touchStartPos.y - rect.top};
const lngLat = map.unproject(point);
setContextMenu({x: point.x, y: point.y, lat: lngLat.lat, lon: lngLat.lng});
}, 500);
}, {passive: true});
canvas.addEventListener("touchmove", (e) => {
if (longPressTimer && touchStartPos) {
const dx = e.touches[0].clientX - touchStartPos.x;
const dy = e.touches[0].clientY - touchStartPos.y;
if (Math.abs(dx) > 10 || Math.abs(dy) > 10) {
clearTimeout(longPressTimer);
longPressTimer = null;
}
}
});
canvas.addEventListener("touchend", () => {
clearTimeout(longPressTimer);
longPressTimer = null;
});
// Update URL on pan/zoom (only while mounted).
map.on("moveend", () => {
if (destroyed) return;
const center = map.getCenter();
const zoom = map.getZoom();
window.history.replaceState(null, '',
`${window.location.pathname}?lat=${center.lat.toFixed(4)}&lon=${center.lng.toFixed(4)}&z=${zoom.toFixed(1)}`
);
});
map.on("load", () => {
if (!destroyed) {
mapRef.current = map;
// Apply saved layer visibility on initial load.
const savedVis = getInitialVisibility();
const allMapLayers = map.getStyle()?.layers || [];
for (const [groupName, visible] of Object.entries(savedVis)) {
const prefixes = LAYER_GROUPS[groupName];
if (!prefixes) continue;
for (const layer of allMapLayers) {
const baseId = layer.id.includes(":") ? layer.id.split(":").slice(1).join(":") : layer.id;
if (prefixes.some(p => baseId.includes(p))) {
map.setLayoutProperty(layer.id, "visibility", visible ? "visible" : "none");
}
}
}
setMapReady(true);
}
});
} catch (e) {
console.error("MapLibre failed to initialize:", e);
if (!destroyed) setError(e.message);
}
};
init();
return () => {
destroyed = true;
if (map) {
map.remove();
}
mapRef.current = null;
setMapReady(false);
// Clean up map params from URL so they don't leak to other pages. Only while the URL is
// still a map page: after navigating away, lat/lon belong to the new page (the Solar
// calculator, for one).
const url = new URL(window.location);
if (url.pathname.startsWith("/map")) {
url.searchParams.delete("lat");
url.searchParams.delete("lon");
url.searchParams.delete("z");
window.history.replaceState(null, '', url.pathname + url.search);
}
};
}, []); // eslint-disable-line react-hooks/exhaustive-deps
// Rebuild style when theme changes.
useEffect(() => {
const map = mapRef.current;
if (!map || !mapReady) return;
const center = map.getCenter();
const zoom = map.getZoom();
map.setStyle(buildStyle(activeFilesRef.current, mapFlavor(theme), hasTerrainRef.current,
scaleUnit, mapSprite(theme)));
map.once("style.load", () => {
map.setCenter(center);
map.setZoom(zoom);
// Re-apply layer visibility state after style rebuild.
const vis = layerVisibilityRef.current;
if (vis) {
const allMapLayers = map.getStyle()?.layers || [];
for (const [groupName, visible] of Object.entries(vis)) {
const prefixes = LAYER_GROUPS[groupName];
if (!prefixes) continue;
for (const layer of allMapLayers) {
const baseId = layer.id.includes(":") ? layer.id.split(":").slice(1).join(":") : layer.id;
if (prefixes.some(p => baseId.includes(p))) {
map.setLayoutProperty(layer.id, "visibility", visible ? "visible" : "none");
}
}
}
}
});
}, [theme, mapReady, scaleUnit]);
const handleScaleUnitChange = useCallback((unit) => {
const map = mapRef.current;
const sc = scaleControlRef.current;
if (map && sc) {
map.removeControl(sc);
const newSc = new maplibregl.ScaleControl({maxWidth: 200, unit});
map.addControl(newSc, "bottom-left");
scaleControlRef.current = newSc;
}
try { localStorage.setItem(STORAGE_KEY_SCALE, unit); } catch (e) { /* ignore */ }
setScaleUnit(unit);
}, []);
const handleCopyCoords = useCallback(() => {
if (!contextMenu) return;
// Match decimal precision to current zoom level so pasting into search doesn't over-zoom.
const map = mapRef.current;
const zoom = map ? map.getZoom() : 10;
const decimals = zoom < 4 ? 1 : zoom < 8 ? 2 : zoom < 12 ? 3 : 4;
const text = `${contextMenu.lat.toFixed(decimals)}, ${contextMenu.lon.toFixed(decimals)}`;
navigator.clipboard.writeText(text).catch(() => {
window.prompt("Copy coordinates:", text);
});
setContextMenu(null);
}, [contextMenu]);
const handleExportPng = useCallback(() => {
const map = mapRef.current;
if (!map) return;
setContextMenu(null);
// Force a fresh render, then capture.
map.once("render", function() {
const c = map.getCenter();
const z = map.getZoom();
const filename = `wrolpi-map_${c.lat.toFixed(4)}_${c.lng.toFixed(4)}_z${z.toFixed(0)}.png`;
map.getCanvas().toBlob(function(blob) {
if (!blob) return;
const url = URL.createObjectURL(blob);
const a = document.createElement("a");
a.href = url;
a.download = filename;
a.click();
URL.revokeObjectURL(url);
});
});
map.triggerRepaint();
}, []);
// --- Pins ---
const loadPins = useCallback(async () => {
const map = mapRef.current;
if (!map) return;
// Remove existing markers.
for (const m of markersRef.current) m.remove();
markersRef.current = [];
const data = await getMapPins();
if (!data?.pins) return;
data.pins.forEach((pin, index) => {
const el = document.createElement("div");
el.style.width = "24px";
el.style.height = "24px";
el.style.borderRadius = "50% 50% 50% 0";
el.style.background = pin.color || "red";
el.style.border = "2px solid white";
el.style.boxShadow = "0 1px 4px rgba(0,0,0,0.4)";
el.style.transform = "rotate(-45deg)";
el.style.cursor = "pointer";
const popup = new maplibregl.Popup({offset: 15}).setHTML(
`<div style="font-size:13px">` +
`<strong>${pin.label || "Pin"}</strong><br/>` +
`<small>${pin.lat.toFixed(4)}, ${pin.lon.toFixed(4)}</small><br/>` +
`<button onclick="window.__deleteMapPin(${pin.id})" ` +
`style="margin-top:4px;padding:2px 8px;cursor:pointer;color:red;border:1px solid red;background:none;border-radius:3px;">` +
`Delete</button></div>`
);
const marker = new maplibregl.Marker({element: el})
.setLngLat([pin.lon, pin.lat])
.setPopup(popup)
.addTo(map);
if (!pinsVisibleRef.current) {
marker.getElement().style.display = "none";
}
markersRef.current.push(marker);
});
}, []);
// Global callback for popup delete buttons.
useEffect(() => {
window.__deleteMapPin = async (pinId) => {
await deleteMapPin(pinId);
await loadPins();
};
return () => { delete window.__deleteMapPin; };
}, [loadPins]);
// Load pins when map is ready.
useEffect(() => {
if (mapReady) loadPins();
}, [mapReady, loadPins]);
const handleAddPin = useCallback(() => {
if (!contextMenu) return;
setAddingPin({lat: contextMenu.lat, lon: contextMenu.lon});
setContextMenu(null);
}, [contextMenu]);
const handleSolar = useCallback(() => {
if (!contextMenu) return;
setContextMenu(null);
navigate(solarCalculatorPath(contextMenu.lat, contextMenu.lon));
}, [contextMenu, navigate]);
const handleSetDefaultLocation = useCallback(async () => {
const map = mapRef.current;
if (!map) return;
const center = map.getCenter();
const zoom = map.getZoom();
await setMapDefaultLocation(center.lat, center.lng, zoom);
await fetchSettings();
setContextMenu(null);
}, [fetchSettings]);
const handleSubmitPin = useCallback(async (label, color) => {
if (!addingPin) return;
const {lat, lon} = addingPin;
setAddingPin(null); // Prevent double-submit.
await addMapPin(lat, lon, label, color);
await loadPins();
}, [addingPin, loadPins]);
if (error) {
return <Panel>
<Header as="h3">Map failed to load</Header>
<p>Your browser may not support WebGL. You can access the standalone map viewer
at <a href={MAP_VIEWER_URI}>{MAP_VIEWER_URI}</a></p>
<p>Error: {error}</p>
</Panel>;
}
return <div ref={mapContainer} style={{position: "relative", width: "100%", height: "85vh"}}>
{mapReady && <MapSearch map={mapRef.current}/>}
{mapReady && <LayerControl map={mapRef.current} scaleUnit={scaleUnit} onScaleUnitChange={handleScaleUnitChange} visibilityRef={layerVisibilityRef}/>}
{contextMenu && <div
style={{
position: "absolute",
left: contextMenu.x,
top: contextMenu.y,
zIndex: 1001,
background: "white",
borderRadius: "0.375rem",
boxShadow: "0 2px 8px rgba(0,0,0,0.3)",
padding: "0.25rem 0",
fontSize: '0.8125rem',
minWidth: "11.25rem",
}}
>
<div style={{padding: "0.375rem 0.75rem", color: "#666", fontSize: '0.75rem', borderBottom: "1px solid #eee"}}>
{(() => {
const map = mapRef.current;
const zoom = map ? map.getZoom() : 10;
const d = zoom < 4 ? 1 : zoom < 8 ? 2 : zoom < 12 ? 3 : 4;
return `${contextMenu.lat.toFixed(d)}, ${contextMenu.lon.toFixed(d)}`;
})()}
</div>
<div
style={{padding: "0.5rem 0.75rem", cursor: "pointer", userSelect: "none"}}
onMouseEnter={e => e.target.style.background = "#f0f0f0"}
onMouseLeave={e => e.target.style.background = "transparent"}
onClick={handleCopyCoords}
>
Copy GPS coordinates
</div>
<div
style={{padding: "0.5rem 0.75rem", cursor: "pointer", userSelect: "none"}}
onMouseEnter={e => e.target.style.background = "#f0f0f0"}
onMouseLeave={e => e.target.style.background = "transparent"}
onClick={handleExportPng}
>
Export as PNG
</div>
<div
style={{padding: "0.5rem 0.75rem", cursor: "pointer", userSelect: "none"}}
onMouseEnter={e => e.target.style.background = "#f0f0f0"}
onMouseLeave={e => e.target.style.background = "transparent"}
onClick={handleAddPin}
>
Add Pin Here
</div>
<div
style={{padding: "0.5rem 0.75rem", cursor: "pointer", userSelect: "none"}}
onMouseEnter={e => e.target.style.background = "#f0f0f0"}
onMouseLeave={e => e.target.style.background = "transparent"}
onClick={handleSolar}
>
Calculate Solar Performance
</div>
<div
style={{padding: "0.5rem 0.75rem", cursor: "pointer", userSelect: "none"}}
onMouseEnter={e => e.target.style.background = "#f0f0f0"}
onMouseLeave={e => e.target.style.background = "transparent"}
onClick={handleSetDefaultLocation}
>
Set as Default View
</div>
</div>}
{addingPin && <AddPinDialog
lat={addingPin.lat}
lon={addingPin.lon}
onSubmit={handleSubmitPin}
onCancel={() => setAddingPin(null)}
/>}
</div>;
}