wrolpi/app
lrnselfreliance 2e0e50c3aa
3D previews load ASCII STLs, stand upright, and fit the preview modal (#952)
* STL files preview with three's own STLLoader

react-stl-viewer inlines a copy of three-stdlib 2.17.2's STLLoader, which reads
ASCII STL text with LoaderUtils.decodeText.  three removed that in r175, so
every ASCII STL preview failed.  The three-stdlib override never reached that
copy, and react-stl-viewer has had no release since January 2024.

The 3MF preview's three.js viewer now previews STL files too, loading each
format with the loader that ships with three, so the loader always matches the
installed three.  react-stl-viewer and the three-stdlib override are removed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* An e2e spec previews ASCII and binary STL files in a real browser

The STL preview only fails in a browser with WebGL, so the spec opens both
encodings on the live stack and checks the dimensions line appears without a
load error.  fb:reset can now write binary files ({base64: ...}).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* STL previews stand Z-up models upright

STLs are Z-up (the 3D printing convention) and three is Y-up, so the
preview rotates STL geometry to stand the model upright, as react-stl-viewer
did.  Model Z reads as Height again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF previews stand Z-up models upright too

3MF is Z-up like STL, so the rotation moves from the STL loader into the
shared viewer and applies to every model.  Model Z reads as Height.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* File previews show their buttons without scrolling

.preview-fit reserved a fixed 18.75rem for the rest of the preview modal,
which was short: every framed preview overflowed a little, and a 3D model's
dimensions line pushed the action buttons below the fold.  The preview modal
now fills its height as a flex column, and the .preview-fit takes whatever
height is left.  Previews without a .preview-fit keep their content's height.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D previews frame the model and light it brightly

- The camera fits the model's bounding sphere into the narrower field of view,
  from a raised three-quarter front view, instead of backing off 2.2x along Z.
- A hemisphere light and a headlight that follows the camera (from a little
  above and left) replace lights whose intensities were set before three's
  r155 lighting change and read dim.
- Geometry without normals (3MF) gets creased normals, so flat faces no longer
  shade into their neighbors.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 15:33:58 -07:00
..
cypress 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
jest 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
public Resume EPUBs and comic books where the reader left off (#798) 2026-10-08 18:19:51 -06:00
scripts ui: the last of Semantic UI, in name and in dead CSS 2026-08-08 18:05:54 -06:00
src 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
.gitignore A new start 2021-11-01 16:43:09 -06:00
cypress.config.js 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
package-lock.json 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
package.json 3D previews load ASCII STLs, stand upright, and fit the preview modal (#952) 2026-11-07 15:33:58 -07:00
README.md Fixing bug where file search would issue twice on load. 2023-04-09 14:34:33 -06:00
serve.json Adding serve.json so epub.html is not rewritten by serve. Buildling app during pi-gen/debian image builds. 2025-03-13 19:34:28 -06:00
tsconfig.json test: the component suite has not run since cypress 15, on any machine (#661) 2026-08-12 21:57:07 -06:00

Getting Started with Create React App

This project was bootstrapped with Create React App.

Available Scripts

In the project directory, you can run:

npm start

Runs the app in the development mode.
Open http://localhost:3000 to view it in your browser.

The page will reload when you make changes.
You may also see any lint errors in the console.

npm test

Launches the test runner in the interactive watch mode.
See the section about running tests for more information.

npm run build

Builds the app for production to the build folder.
It correctly bundles React in production mode and optimizes the build for the best performance.

The build is minified and the filenames include the hashes.
Your app is ready to be deployed!

See the section about deployment for more information.

npm run eject

Note: this is a one-way operation. Once you eject, you can't go back!

If you aren't satisfied with the build tool and configuration choices, you can eject at any time. This command will remove the single build dependency from your project.

Instead, it will copy all the configuration files and the transitive dependencies (webpack, Babel, ESLint, etc) right into your project so you have full control over them. All of the commands except eject will still work, but they will point to the copied scripts so you can tweak them. At this point you're on your own.

You don't have to ever use eject. The curated feature set is suitable for small and middle deployments, and you shouldn't feel obligated to use this feature. However we understand that this tool wouldn't be useful if you couldn't customize it when you are ready for it.

Learn More

You can learn more in the Create React App documentation.

To learn React, check out the React documentation.

Code Splitting

This section has moved here: https://facebook.github.io/create-react-app/docs/code-splitting

Analyzing the Bundle Size

This section has moved here: https://facebook.github.io/create-react-app/docs/analyzing-the-bundle-size

Making a Progressive Web App

This section has moved here: https://facebook.github.io/create-react-app/docs/making-a-progressive-web-app

Advanced Configuration

This section has moved here: https://facebook.github.io/create-react-app/docs/advanced-configuration

Deployment

This section has moved here: https://facebook.github.io/create-react-app/docs/deployment

npm run build fails to minify

This section has moved here: https://facebook.github.io/create-react-app/docs/troubleshooting#npm-run-build-fails-to-minify