usb_config.md updated from https://stackedit.io/

This commit is contained in:
noon92 2025-01-08 14:58:31 +02:00
parent 2822eec647
commit 13d1e6fc41

View file

@ -68,7 +68,7 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in
| LED blink pattern | Meaning | Possible causes | Solutions |
|--|--|--|--|
|<center>⚠️<br>________________<br>1 very long blink, lasting 5 seconds| Failed to mount USB drive. Ignoring.| <li>Invalid filesystem<li>Corrupted partition table<li>Defective USB drive<li>Defective USB OTG adapter | <li>Use a supported partition (FAT32, exFAT, NTFS, ext4)<li>Repair partition table<li>Try another USB drive<li>Try another USB OTG adapter |
|<center>⚠️<br>\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_<br>2 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt contains the `dont_run_config_if_log_exists` line and a log is present on the USB drive. Ignoring.| Misconfiguration. | Remove log from USB drive or remove `dont_run_config_if_log_exists` line from femtofox-config.txt |
|<center>⚠️<br>\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_<br>2 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt contains `dont_run_if_log_exists="true"` and a log is present on the USB drive. Ignoring.| Misconfiguration. | Remove log from USB drive or remove `dont_run_if_log_exists` line from femtofox-config.txt |
|<center>⚠️<br>\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_<br>3 long blinks, each lasting 1.5 seconds | USB drive mounted successfully but femtofox-config.txt was not found. Ignoring.| Config file missing. | Create configuration file as described above. |
|<center>⚠️<br>\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_&nbsp;&nbsp;\_\_\_\_\_<br>5 long blinks, each lasting 1.5 seconds | USB drive mounted successfully and femtofox-config.txt was found but did not contain readable configuration data. Ignoring.| Configuration file improperly formatted or contains no data. | Check configuration file contents as described above. |
|<center>⚠️<br>\_\_\_&nbsp;&nbsp;\_\_\_&nbsp;&nbsp;\_&nbsp;&nbsp;\_&nbsp;&nbsp;\_\_\_&nbsp;&nbsp;\_\_\_&nbsp;&nbsp;\_&nbsp;&nbsp;\_<br>2 long blinks, each lasting 1 second, then 2 short blinks, each lasting 1/4 of a second. Repeats twice | Error while trying to implement a Meshtastic setting after 3 attempts. Some settings may have been implemented successfully.| <li>The error may be transient.<li>Configuration file may contain improper data. | <li>Try again.<li>Check configuration file contents as described above.<li>Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting.|
@ -78,6 +78,6 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in
> [!NOTE]
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
<!--stackedit_data:
eyJoaXN0b3J5IjpbMTgxNjgzMzAxMiwxNzkyOTA1ODk2LDQyND
g4ODY2OCwtMTcxNDg1NzE1N119
eyJoaXN0b3J5IjpbLTIxMTE4MzE2OTgsMTgxNjgzMzAxMiwxNz
kyOTA1ODk2LDQyNDg4ODY2OCwtMTcxNDg1NzE1N119
-->