foxbuntu_install.md updated from https://stackedit.io/

This commit is contained in:
noon92 2024-12-23 15:33:16 +02:00
parent 791ba8dcbd
commit 35dbed3e51

View file

@ -13,7 +13,7 @@ To install Foxbuntu, you'll need the following:
3. Insert the microSD card into the Luckfox Pico Mini. The microSD slot is on the back of the board.
4. Following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings.
5. Using a USB OTG adapter, plug the USB flash drive into the *data* USB port.
> [!NOTE]
> [!TIP]
> Optional: attach a USB to serial adapter to the Femtofox via the TX2 and RX2 pins for debug console. Remember to bridge the grounds!
> Optional: plug an RJ45 cable in to the ethernet port, if you have one installed.
7. Connect the Femtofox to power, either via the *power* USB-C port (on the same side as the ethernet port) or via the 3.3v or the 5v JST power plugs.