mirror of
https://github.com/femtofox/femtofox.git
synced 2026-11-19 22:46:38 -05:00
foxbuntu_install.md updated from https://stackedit.io/
This commit is contained in:
parent
9cfcc14a6c
commit
b9b07a4e82
1 changed files with 21 additions and 1 deletions
|
|
@ -1 +1,21 @@
|
|||
## Installation instructions for Foxbuntu
|
||||
## Requirements for installing Foxbuntu
|
||||
To install Foxbuntu, you'll need the following:
|
||||
1. microSD card. You can select one from [Supported Hardware](supported_hardware.md), but any card over 8gb and supporting UHS-I *should* work.
|
||||
2. microSD card reader for your PC.
|
||||
3. USB OTG adapter.
|
||||
4. USB flash drive.
|
||||
5. A Femtofox.
|
||||
|
||||
## Installation instructions
|
||||
1. Download the latest [stable Foxbuntu release.](https://github.com/noon92/femtofox/releases). At the bottom of the release, click the <u>.7z</u> file to download.
|
||||
2. Flash the image your MicroSD card using [Balena Etcher](https://etcher.balena.io/) or your favorite flashing program. You will likely get a warning that the image appears to be invalid or has no partition table. This is normal.
|
||||
3. Insert the microSD card into the Luckfox Pico Mini.
|
||||
* Optional: attach a USB to serial adapter to the Femtofox via the TX2 and RX2 pins for debug console. Remember bridge grounds!
|
||||
4. Following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings.
|
||||
5. Using your USB OTG adapter, plug the USB flash drive into the Luckfox Pico Mini's USB port.
|
||||
6. Give power to the Femtofox.
|
||||
7. The Femtofox will perform its first boot. This can take up to 5 minutes. When boot is complete, the USR LED will blink 5 times, 1/2 a second each. At this point, Meshtastic should be running and if you plug in a wifi adapter you should have network.
|
||||
* Optional: plug an RJ45 cable in to the ethernet port, if you have one installed.
|
||||
8. To connect to your Femtofox via SSH, open [PuTTY](https://www.putty.org/) or your favorite SSH client and connect to your Femtofox via `femtofox.local` or its IP (check your router).
|
||||
* Username: `femto`
|
||||
* Password: `fox`
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue