This commit is contained in:
nagumii 2024-12-10 21:59:20 +02:00
commit c2c4ee0166
2 changed files with 17 additions and 10 deletions

View file

@ -112,7 +112,7 @@
<td>rtl8188eu, rtl8188eus</td>
<td>✔️</td>
<td>✔️</td>
<td>Idle: 0.25w<br>TXing: 0.4w<br>Off: 0.025w</td>
<td>Idle: 0.25w<br>TXing: 0.4w<br>Off: 0.026w</td>
<td>Model tested:<br><a href="https://techinfodepot.shoutwiki.com/wiki/TP-LINK_TL-WN725N_v2">TP-LINK TL-WN725N <strong>V2</strong></a>: working<br><a href="https://techinfodepot.shoutwiki.com/wiki/TP-LINK_TL-WN722N_v1.x">TP-Link TL-WR722N <strong>V4</strong></a>: working (v2, v3 <em>should</em> be identical)</td>
</tr>
<tr>
@ -235,6 +235,13 @@
<td></td>
</tr>
<tr>
<td>rtl8821au</td>
<td>✔️</td>
<td>❌</td>
<td></td>
<td>Tested:<br><a href="https://www.tp-link.com/us/home-networking/usb-adapter/archer-t2u-plus/">TP-Link Archer T2U Plus</a>: <strong>NOT</strong> working</td>
</tr>
<tr>
<td>rtl8xxx other</td>
<td></td>
<td></td>

View file

@ -41,14 +41,14 @@ Enter as many or as few settings as you like.</p>
For <code>meshtastic_lora_radio</code>, choose your radio from the supported hardware list.<br>
Options are:</p>
<ul>
<li>ebyte-e22-900m30sm</li>
<li>ebyte-e22-900m22s</li>
<li>e22-900mm22s</li>
<li>heltec-ht-ra62</li>
<li>seeed-wio-sx1262</li>
<li>waveshare-sx126x-xxxm</li>
<li>ai-thinker-ra-01sh</li>
<li>none <em>(for simradio)</em></li>
<li><code>ebyte-e22-900m30sm</code></li>
<li><code>ebyte-e22-900m22s</code></li>
<li><code>e22-900mm22s</code></li>
<li><code>heltec-ht-ra62</code></li>
<li><code>seeed-wio-sx1262</code></li>
<li><code>waveshare-sx126x-xxxm</code></li>
<li><code>ai-thinker-ra-01sh</code></li>
<li><code>none</code> <em>(for simradio)</em></li>
</ul>
<p><strong>Important:</strong> You cannot set URL and security settings in the same operation - if you must set both, set the URL first, then edit the <code>femtofox-config.txt</code> file on the USB drive to remove the URL and add in your security settings.</p>
<p>To add a <code>meshtastic_admin_key</code>, copy it from the app and add <code>base64:</code> to the beginning (<code>meshtastic_admin_key="base64:T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="</code>).</p>
@ -100,7 +100,7 @@ A log (<code>femtofox-config.log</code>) is saved to <code>/home/femto</code> an
<td><li>Try again.</li><li>Check configuration file contents as described above.</li><li>Check the log.<br><br>This pattern may flash before other patterns. The pattern will repeat once for each failed setting.</li></td>
</tr>
<tr>
<td><center>✅<br><strong>. . . . . . . . . .</strong><br>10 very fast blinks, each lasting 1/8th of a second</center></td>
<td><center>✅<br>. . . . . . . . . .<br>10 very fast blinks, each lasting 1/8th of a second</center></td>
<td>USB drive mounted successfully, and femtofox-config.txt was found and contained configuration data which was sent for deployment. Any affected services will now restart. You can disconnect the USB drive.</td>
<td>This does not mean that the information in the config file is correct - only that it was readable.<br>Note that the “success” boot code will flash if at least one setting is successfully read - even if the setting was not implemented successfully.</td>
<td></td>