Update usb_config.md

This commit is contained in:
noon92 2025-01-24 16:59:02 +02:00 • committed by GitHub
parent d14ba4ba3d
commit c6ec052fd7
No known key found for this signature in database
GPG key ID: B5690EEEBB952194

View file

@ -7,9 +7,12 @@ Configurable settings are:
- Wifi PSK (password)
- Wifi country
- Timezone
- Activity LED (blinky light - disable for minor power savings)
- Meshtastic:
- LoRa radio model
- [URL](https://meshtastic.org/docs/software/python/cli/#--seturl-seturl) (used to configure LoRa settings and channels)
- Security: public key
- Security: private key
- Security: Add Admin Key
- Security: Clear Admin Key List
- Security: [Legacy Admin Channel](https://meshtastic.org/docs/configuration/radio/security/#admin-channel-enabled) enable/disable
@ -23,9 +26,12 @@ wifi_ssid="Your SSID name"
wifi_psk="wifipassword"
wifi_country="US"
timezone="America/New_York"
act_led="enable"
meshtastic_lora_radio="ebyte-e22-900m30s"
meshtastic_url="https://meshtastic.org/e/#CgMSAQESCAgBOAFAA0gB"
meshtastic_admin_key="T/b8EGvi/Nqi6GyGefJt/jOQr+5uWHHZuBavkNcUwWQ="
#meshtastic_public_key="XX="
#meshtastic_private_key="XX="
meshtastic_admin_key="XX="
meshtastic_legacy_admin="true"
dont_run_if_log_exists="true"
```
@ -56,7 +62,7 @@ dont_run_if_log_exists="true"
> [!NOTE]
> `dont_run_if_log_exists="true"` will prevent the USB configuration tool from working if there's a log present on the USB drive, indicating it has already been run. There is also an LED boot code for this, described below.
**To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.**
**To apply your configuration, reboot the Femtofox with the USB drive plugged in, or run `sudo femto-config` -> `Utilites` -> `Run USB configuration tool`. No other USB drives can be plugged in at the same time.**
A log (`femtofox-config.log`) is saved to `/home/femto` and the USB drive (except on NTFS, which is read only).
<br>
### Boot codes
@ -74,6 +80,3 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in
> [!NOTE]
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
<!--stackedit_data:
eyJoaXN0b3J5IjpbLTE3MzAwMTU5Nl19
-->