usb_config.md updated from https://stackedit.io/

This commit is contained in:
noon92 2025-01-06 18:43:45 +02:00
parent d92ac547c3
commit f1e4f82d52

View file

@ -57,7 +57,7 @@ dont_run_if_log_exists
> Attempting to set wifi settings via USB configuration tool without a wifi adapter connected will lead to a 5 minute hang while the configuration tool runs - either disconnect and reconnect power or wait the full 5 minutes to to recover.
> [!NOTE]
> `dont_run_if_log_exists` will prevent the USB configuration tool from working if there's a log present on the USB drive, indicating it has already been run. There is also an LED boot code for this, descri
> `dont_run_if_log_exists` will prevent the USB configuration tool from working if there's a log present on the USB drive, indicating it has already been run. There is also an LED boot code for this, described below.
**To apply your configuration, reboot the Femtofox with the USB drive plugged in. No other USB drives can be plugged in at the same time.**
A log (`femtofox-config.log`) is saved to `/home/femto` and the USB drive (except on NTFS, which is read only).
@ -78,6 +78,6 @@ When the Femtofox is finished booting, it will blink its User LED (see below) in
> [!NOTE]
> Boot codes can appear in sequence - for example: one long (4 second) blink, followed by 5 medium (half second) blinks means the USB drive failed to mount, and that the boot sequence is complete.
<!--stackedit_data:
eyJoaXN0b3J5IjpbLTE0MjYxNzM1NTYsNDI0ODg4NjY4LC0xNz
E0ODU3MTU3XX0=
eyJoaXN0b3J5IjpbMTc5MjkwNTg5Niw0MjQ4ODg2NjgsLTE3MT
Q4NTcxNTddfQ==
-->