mirror of
https://github.com/femtofox/femtofox.git
synced 2026-11-19 22:46:38 -05:00
20 lines
No EOL
1.1 KiB
Markdown
20 lines
No EOL
1.1 KiB
Markdown
## Femtofox - Getting Started
|
|
This guide assumes a certain level of familiarity with [Meshtastic](meshtastic.org), and [Meshtastic nodes](https://meshtastic.org/docs/getting-started/).
|
|
|
|
The Femtofox is similar to, and can functionally replace, a [Raspberry Pi Linux Native Meshtastic node](https://meshtastic.org/docs/hardware/devices/linux-native-hardware/). However, the Foxbuntu OS takes away most of the heavy lifting of a typical install, leaving you free to build your mesh application without the initial hurdles.
|
|
|
|
### Hardware
|
|
To get started, you will need a Femtofox. You can either build or buy one.
|
|
|
|
#### 1. Building a Femtofox
|
|
Femtofox Community Edition (CE) is provided as standard PCB Gerber files and suitable Bills of Materials (BOM) and Pick and Place files for the components.
|
|
Download the Gerber files from [here](TBC), selecting the set of files for your application:
|
|
|
|
- Bare PCB - you have all of the necessary components on hand
|
|
- SMD populated PCB - you have a Luckfox Pico Mini and suitable radio module on hand
|
|
- Radio
|
|
|
|
###
|
|
<!--stackedit_data:
|
|
eyJoaXN0b3J5IjpbLTE1NDE2NDk4MjddfQ==
|
|
--> |