Andrea Mazzoleni
214070dc4d
Add support for a new "smartctl" config option
...
This option allows to configure custom smartctl
commands for devices that cannot be autodetected.
2015-04-08 22:56:44 +02:00
Andrea Mazzoleni
024b3f80fa
Print failure rate also without rotation rate
2015-04-08 18:13:24 +02:00
Andrea Mazzoleni
1613ca1c86
Remove dependency to SMART 199 attribute
...
This is in general not an indication of disk failure,
but only a problem in communication with the controller.
After fixing that problem, the errors disappear, but the counter
cannot be zeroed.
2015-04-08 17:30:34 +02:00
Andrea Mazzoleni
9a10c94946
Retry smartctl command in Windows with -d sat if no info
2015-04-07 21:59:09 +02:00
Andrea Mazzoleni
bb76d48ace
Update SMART 188 table after masking to 16 bit also on generation
2015-04-06 22:30:20 +02:00
Andrea Mazzoleni
55ad36d1a5
Add the "devices" command as an official one
2015-04-06 17:11:27 +02:00
Andrea Mazzoleni
36a05fe53a
Mask the SMART values before using them
...
The 188 value for Seagate disk must use only the lower 16 bits,
others value are generally limited to 32 bits.
2015-04-06 17:10:28 +02:00
Andrea Mazzoleni
3dde106f6d
Add extra testing for the new 'smart' command
2015-03-31 23:47:34 +02:00
Andrea Mazzoleni
35b1b08b6c
Clean the cpu.h header
2015-03-30 23:36:36 +02:00
Andrea Mazzoleni
36061561cc
Some more GiB to GB conversion
2015-03-29 23:18:30 +02:00
Andrea Mazzoleni
fb46313666
Use a simpler method to print disk space
2015-03-29 22:23:24 +02:00
Andrea Mazzoleni
3a4ce0b1e2
Use GB instead of GiB to be more consistent with HD size.
2015-03-29 22:18:21 +02:00
Andrea Mazzoleni
5f29608ebf
Fix wrong pairing of va_start and va_end
2015-03-26 19:41:31 +01:00
Andrea Mazzoleni
1bbca4ca40
Remove impossible condition about io_error in hashing
2015-03-26 19:37:21 +01:00
Andrea Mazzoleni
21ce043725
Use manual line buffering for stdout/stderr.
...
This is needed for Windows where line buffering is not supported.
2015-03-23 22:57:36 +01:00
Andrea Mazzoleni
f48c0c3cd0
Rename raid_rec_dataonly() to raid_data()
2015-03-21 17:16:16 +01:00
Andrea Mazzoleni
eb5ac437b2
Review manpage about memory size
2015-03-13 19:34:45 +01:00
Andrea Mazzoleni
529226087a
Minor adjustment in the SMART status output info
2015-03-12 21:13:09 +01:00
Andrea Mazzoleni
1c3000ae04
Use a better cpu detection
...
We now follow precisely the Intel documentation.
2015-03-09 22:28:51 +01:00
Andrea Mazzoleni
83d967e2c0
Change "diff" to return an error if a "sync" is required
2015-03-02 23:01:15 +01:00
Andrea Mazzoleni
76cb3d5b88
Fix printing of wasted space in "status" command
2015-03-01 19:20:03 +01:00
Andrea Mazzoleni
5812ec8bd8
Use standard smartctl.exe
2015-02-27 23:33:16 +01:00
Andrea Mazzoleni
e56de653da
Introduce a new messaging system
2015-02-22 14:31:03 +01:00
Andrea Mazzoleni
fa5f31ddf9
Move stream implementation to a specific source file
2015-02-21 09:00:34 +01:00
Andrea Mazzoleni
d4a92f4918
Add additional regression test for streams
2015-02-20 19:07:19 +01:00
Andrea Mazzoleni
f6611557d0
Remove some override in reading the binary state.
...
They have no chance to work as a wrong blockmax would
unsych the stream.
2015-02-19 19:47:22 +01:00
Andrea Mazzoleni
84949d96da
Add an extra CRC check on the data written to the streams
...
This is intented to detect memory errors during the processing.
2015-02-18 19:27:59 +01:00
Andrea Mazzoleni
87aa5d5e7b
Add a memory test at the stream buffer
2015-02-18 19:17:48 +01:00
Andrea Mazzoleni
fed3e8be1f
Use shorter fake device names in Windows
2015-02-17 22:27:11 +01:00
Andrea Mazzoleni
d37e0703c3
Run tools from exe dir in Windows
2015-02-16 23:38:34 +01:00
Andrea Mazzoleni
fa430adbfc
Add a mutex for handling the UTF conversion.
2015-02-16 23:36:53 +01:00
Andrea Mazzoleni
cbf4d32d13
Change the MinGW target for x86.
...
This one support better the printf attribute format.
2015-02-16 19:22:59 +01:00
Andrea Mazzoleni
fba7cdcbe2
Fix the printf attribute for MingW
2015-02-16 18:42:52 +01:00
Andrea Mazzoleni
14c8307ed4
Extend the "smart" and "down" command to Windows
...
Now we are able to detect what low level device is associated
to the high level volume.
2015-02-15 18:34:27 +01:00
Andrea Mazzoleni
162d049bb9
Clearify some comments for Windows filesystem
2015-02-13 18:50:52 +01:00
Andrea Mazzoleni
894cd5ee70
In Windows spinup use CreteFile instead than FindFirst
...
It's just not possible to open the root dir with
FindFirstFile("C:\") or FindFirstFile("C:").
2015-02-13 18:49:46 +01:00
Andrea Mazzoleni
f65ee373e5
Mark the disks recognized as SSD
2015-02-13 18:49:01 +01:00
Andrea Mazzoleni
28dc9a6a7b
Be more flexible when parsing smartctl output
2015-02-13 18:48:16 +01:00
Andrea Mazzoleni
ea07a7025e
Escape path in the log file
2015-02-12 22:55:05 +01:00
Andrea Mazzoleni
8f2b148ff1
Extend the "Wasted" column to show space still to waste
2015-02-12 21:03:38 +01:00
Andrea Mazzoleni
bed594c8b0
New tables for estimating the failure probability
2015-02-08 21:00:47 +01:00
Andrea Mazzoleni
b55d2eb3b8
Remove the check for FLAG_COMMAND
...
In some USB enclosures some SMART commands may fail
but smartctl is still able to report data.
2015-02-08 15:24:39 +01:00
Andrea Mazzoleni
60f0c2494f
Add most of the stdout output also to stdlog
2015-02-07 16:57:36 +01:00
Andrea Mazzoleni
0a657cbdb0
Make the quiet option to hide the progress bar
2015-02-04 08:10:39 +01:00
Andrea Mazzoleni
2ac751b6d9
Put all the stdout output also in stdlog
2015-02-03 19:35:43 +01:00
Andrea Mazzoleni
3884af54ea
Put the "Stopping" message into stderr
2015-02-03 18:53:23 +01:00
Andrea Mazzoleni
7954e9405f
Disable stdlog if log file is not specified
2015-02-03 18:30:32 +01:00
Andrea Mazzoleni
798de7ca99
Change the flush logic for streams
...
Now stdout and stderr are always line buffered, and stdlog only
flushed on request.
2015-02-03 18:29:11 +01:00
Andrea Mazzoleni
80d51384ac
Adjust some error messages in some commands
2015-02-03 18:12:52 +01:00
Andrea Mazzoleni
590d1aa51e
Avoid to overuse va_arg more than one time
2015-02-03 08:10:22 +01:00
