ee0e85a69c
Shows the expected millivolt drop across a single wire at 1A, 5A, and 10A so a wire can be verified with a known current and sense leads. Shares the length, units, and wire type with the Power Loss calculator (state lifted to the parent, same localStorage keys). Length is not doubled because the sense leads measure across one conductor. Includes a wire temperature input (default room temperature, °F/°C follows the SAE toggle, stored canonically in Celsius) which corrects resistance using the material's temperature coefficient. Adds Solid/Stranded Aluminum wire types with published resistance tables for both unit systems, and aluminum's 0.403%/°C coefficient. Fixes erroneous copper resistance values: solid 6 AWG was 0.3134 instead of the published 0.3951 Ohm/kft, and stranded 0/2/4 AWG were decimal typos (0.022/0.019/0.038 instead of 0.122/0.194/0.308 - the table is solid x 1.24 throughout). New tests enforce monotonicity and ratio consistency. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|---|---|---|
| .. | ||
| cypress | ||
| public | ||
| scripts | ||
| src | ||
| .gitignore | ||
| cypress.config.js | ||
| package-lock.json | ||
| package.json | ||
| README.md | ||
| serve.json | ||
| tsconfig.json | ||
Getting Started with Create React App
This project was bootstrapped with Create React App.
Available Scripts
In the project directory, you can run:
npm start
Runs the app in the development mode.
Open http://localhost:3000 to view it in your browser.
The page will reload when you make changes.
You may also see any lint errors in the console.
npm test
Launches the test runner in the interactive watch mode.
See the section about running tests for more
information.
npm run build
Builds the app for production to the build folder.
It correctly bundles React in production mode and optimizes the build for the best performance.
The build is minified and the filenames include the hashes.
Your app is ready to be deployed!
See the section about deployment for more information.
npm run eject
Note: this is a one-way operation. Once you eject, you can't go back!
If you aren't satisfied with the build tool and configuration choices, you can eject at any time. This command will
remove the single build dependency from your project.
Instead, it will copy all the configuration files and the transitive dependencies (webpack, Babel, ESLint, etc) right
into your project so you have full control over them. All of the commands except eject will still work, but they will
point to the copied scripts so you can tweak them. At this point you're on your own.
You don't have to ever use eject. The curated feature set is suitable for small and middle deployments, and you
shouldn't feel obligated to use this feature. However we understand that this tool wouldn't be useful if you couldn't
customize it when you are ready for it.
Learn More
You can learn more in the Create React App documentation.
To learn React, check out the React documentation.
Code Splitting
This section has moved here: https://facebook.github.io/create-react-app/docs/code-splitting
Analyzing the Bundle Size
This section has moved here: https://facebook.github.io/create-react-app/docs/analyzing-the-bundle-size
Making a Progressive Web App
This section has moved here: https://facebook.github.io/create-react-app/docs/making-a-progressive-web-app
Advanced Configuration
This section has moved here: https://facebook.github.io/create-react-app/docs/advanced-configuration
Deployment
This section has moved here: https://facebook.github.io/create-react-app/docs/deployment
npm run build fails to minify
This section has moved here: https://facebook.github.io/create-react-app/docs/troubleshooting#npm-run-build-fails-to-minify