1. Download the latest stable [Foxbuntu release](https://github.com/noon92/femtofox/releases). At the bottom of the release, click the <u>.7z</u> file to download.
2. Flash the image your MicroSD card using [Balena Etcher](https://etcher.balena.io/) or your favorite flashing program. You will likely get a warning that the image appears to be invalid or has no partition table. This is normal.
4. Configure the Femtofox using one of the following methods:
* For USB config, following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings. Using a USB OTG adapter, plug the USB flash drive into the *data* USB port (the port on the Luckfox.
* On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting <kbd>WIN</kbd>+<kbd>R</kbd> and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named "USB-SERIAL CH340".
5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug. Using the USB-C port on the Luckfox is possible, but will prevent usage of USB peripherals.
6. The Femtofox will perform its first boot. This can take up to 5 minutes (subsequent boots ~40 seconds). When boot is complete, the USR LED will blink 5 times, 1/2 a second each.
7. Default username and password is `femto`:`femto`. You are required to change the password on first login.