mirror of
https://github.com/femtofox/femtofox.git
synced 2026-11-20 06:56:29 -05:00
foxbuntu_install.md updated from https://stackedit.io/
This commit is contained in:
parent
128c04f9d6
commit
f0df3a3a34
1 changed files with 6 additions and 6 deletions
|
|
@ -5,10 +5,10 @@ To install Foxbuntu, you'll need the following:
|
|||
1. microSD card. You can select one from [supported hardware](supported_hardware.md), but any card over 8gb and supporting UHS-I *should* work
|
||||
2. microSD card reader for your computer
|
||||
3. A method to configure the Fox:
|
||||
* With any model, a USB OTG adapter (USB-C to USB-A) and a USB flash drive, OR
|
||||
* With a Femtofox Pro, a USB-C cable to connect the Fox to your computer, OR
|
||||
* With any model, a USB UART serial adapter to connect to UART2 (serial debug pins), OR
|
||||
* With any model with an ethernet port, an ethernet cable
|
||||
* USB OTG adapter (USB-C to USB-A) and a USB flash drive, OR
|
||||
* USB-C cable to connect the Fox to your computer (Femtofox Pro only), OR
|
||||
* USB UART serial adapter connected to UART2 (serial debug pins), OR
|
||||
* An ethernet cable (models with ethernet port)
|
||||
4. A Femtofox (duh!)
|
||||
|
||||
### Installation instructions
|
||||
|
|
@ -17,7 +17,7 @@ To install Foxbuntu, you'll need the following:
|
|||
3. Insert the microSD card into the Luckfox Pico Mini. The microSD slot is on the back of the board.
|
||||
4. Configure the Femtofox using one of the following methods:
|
||||
* For USB config, following the instructions on the [USB Configuration Tool](usb_config.md) page, prepare your USB flash drive with your desired settings. Using a USB OTG adapter, plug the USB flash drive into the *data* USB port (the port on the Luckfox.
|
||||
* On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting <kbd>WIN</kbd>+<kbd>R</kbd> and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named
|
||||
* On Femtofox Pro, connect the *Power USB-C port* to your PC with a cable, and open a serial console application such as PuTTY for windows. Select your the Femtofox's COM port (find the correct COM port in Windows hitting <kbd>WIN</kbd>+<kbd>R</kbd> and entering `cmd /k wmic path Win32_SerialPort get DeviceID, Description && pause`. The port should be named "USB-SERIAL CH340".
|
||||
* Use a USB UART serial adapter to connect to UART2 (serial debug pins).
|
||||
* Use an ethernet cable and SSH in. Femtofox's default hostname is femtofox.local.
|
||||
5. Connect the Femtofox to power, either via the *power USB-C port* (Pro model only, on the same side as the ethernet port) or via the power-in JST power plug.
|
||||
|
|
@ -26,5 +26,5 @@ To install Foxbuntu, you'll need the following:
|
|||
* Username: `femto`
|
||||
* Password: `fox`
|
||||
<!--stackedit_data:
|
||||
eyJoaXN0b3J5IjpbMTMwMjgxOTI4Ml19
|
||||
eyJoaXN0b3J5IjpbLTE0Mjg3MDkzMzldfQ==
|
||||
-->
|
||||
Loading…
Add table
Add a link
Reference in a new issue